Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-06-09-58

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 995482
DEA: 112T36U4
EFIS: 1122000243
DIST-CO-RTE-PM11-SD-5-37.4-52.6
Award Date10/20/2023
Closeout DateNot set
Work DescriptionI-5 NCC SEGMENT 4C
Location DescriptionI-5 in San Diego County at Various Locations from Lomas Santa Fe Drive Undercrossing to 0.2 Mile North of Oceanside Undercrossing
QA Service Level1 (Verified on 11/20/2023)

Sample Information

Sample Taken Date06/09/2025 Sample Unique Key58
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/11/2025
Sample typeQuality Assurance A brief description of the samplePSU
The quantity of what the sample constitutes16 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of samplerTET Telephone number of sampler6199366795
Laboratory sample identification25-06-09-58-PSU Linked DIME Sample ID2025-06-09-59
The fabricator/manufacturer/facility nameVulcan Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number21218080SR
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-06-09-58-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory06/24/202506/24/2025
Yes
06/25/2025Complies Target - 7.50% , TESTED 7.67% Saved Material for T30Public - Test Data Visible
2025-06-09-58-2AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory06/24/202506/24/2025
Yes
06/24/2025NON COMPLIANCE Target = 2.457 Tested 2 times 1st - 2.426 and 2nd- 2.428 Public - Test Data Visible
2025-06-09-58-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory06/24/202506/24/2025
Yes
06/25/2025Complies Target 4.0% All 3 Samples pass GmbPublic - Test Data Visible
2025-06-09-58-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory06/24/202506/24/2025
Yes
06/25/2025Does Not Comply Target 4.0% Tested an Avg of 1.8%Public - Test Data Visible
2025-06-09-58-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory07/01/202507/01/2025
Yes
07/02/2025Complies Target WET > 70 psi and DRY > 100 psi Tested WET -71 and DRY 100 psiPublic - Test Data Visible
2025-06-09-58-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory06/26/202506/26/2025
Yes
06/26/2025Complies Target < 12.7 mm Tested Avg of 8.14 mmPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-06-09-58-1 AASHTO T308-10 (Verified)
DIME Test ID: 2025-06-09-58-2 AASHTO T209-22 (Verified)
DIME Test ID: 2025-06-09-58-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-06-09-58-4 AASHTO T269-14 (Verified)
DIME Test ID: 2025-06-09-58-5 AASHTO T283-14 (Verified)
DIME Test ID: 2025-06-09-58-6 CTM 389-19 (Verified)