Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-05-20-45
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000777 DEA: 07370404 EFIS: 0720000128 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-R59.5/R73.7 |
| Award Date | 02/06/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PAVEMENT, PLACE HOT MIX ASPHALT AND INSTALL MGS. |
| Location Description | LOS ANGELES COUNTY FROM LAKE HUGHES ROAD UNDERCROSSING TO 0.7 MILE SOUTH OF VISTA DEL LAGO ROAD OVERCROSSING. |
| QA Service Level | 1 (Verified on 11/25/2024) |
Sample Information
| Sample Taken Date | 05/20/2025 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/23/2025 |
| Sample type | Verification | A brief description of the sample | JMF 3/4'' RHMA G SP 1.0% LMS |
| The quantity of what the sample constitutes | 5bags of comb. L.T. Agg.,13bags of virgin Agg. 2 cans each of Hi-Nat, 1can of lime | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | S | Last name of sampler or witnessed by | Ahumada |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0307G-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Griffith Edmonston | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-15-0068 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belty Cut at Griffith Edmonston Lebec | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | GRF-23-34 RHMA-LSM | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-05-20-45-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Robert Guillen/Robert J, CT D08 - Fontana Southern Regional Laboratory | 05/28/2025 | 06/03/2025 | No | Combined Virgin Aggregate Gradation | |||
| 2025-05-20-45-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | M.M., CT D08 - Fontana Southern Regional Laboratory | 05/29/2025 | 06/03/2025 | No | ||||
| 2025-05-20-45-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 05/29/2025 | 06/03/2025 | No | ||||
| 2025-05-20-45-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 05/28/2025 | 06/03/2025 | No | ||||
| 2025-05-20-45-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 05/29/2025 | 06/03/2025 | No | ||||
| 2025-05-20-45-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/29/2025 | 06/03/2025 | No | ||||
| 2025-05-20-45-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/29/2025 | 06/03/2025 | No | ||||
| 2025-05-20-45-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/29/2025 | 06/03/2025 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-05-20-45-1 AASHTO T27-14
DIME Test ID: 2025-05-20-45-2 AASHTO T84-14
DIME Test ID: 2025-05-20-45-3 AASHTO T85-13
DIME Test ID: 2025-05-20-45-4 AASHTO T96-02r10
DIME Test ID: 2025-05-20-45-5 AASHTO T176-08
DIME Test ID: 2025-05-20-45-6 AASHTO T304-11
DIME Test ID: 2025-05-20-45-7 AASHTO T335-09r13
DIME Test ID: 2025-05-20-45-8 ASTM D4791-10