DIME - Sample Record for DIME Sample ID 2023-05-15-126

DIME » All Projects » Project - DEA: JMF-DATA » Sample 2023-05-15-126 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2023-05-15-126

Project Information

Project Identifiers	Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA
DIST-CO-RTE-PM	59---
Award Date	Not set
Closeout Date	Not set
Work Description	Special project for storing JMF sample data
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	05/15/2023	Sample Unique Key	126
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/15/2023
Sample type	Verification	A brief description of the sample	Combined Untreated 3/4-inch Aggregate
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Ward	Last name of sampler or witnessed by	Jenkins
Title of sampler	Not set	Telephone number of sampler	Not set
Laboratory sample identification	Not set	Linked DIME Sample ID	Not set
The fabricator/manufacturer/facility name	J.F. Shea Construction — Fawndale Rock and Asphalt — Fawndale Rock Quarry (Redding, CA)	Transportation Laboratory (TL) Number	Not set
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0017::Fawndale Rock Quarry (Redding, CA)
The fabricator's/manufacturer's product name for the sample	Not set	The fabricator/manufacturer designation for the sample	Not set
The plant number	Not set	A detailed description of where the material sample was collected	Laboratory Batched from Sized Untreated Virgin Aggregate Stockpile Samples
Where the material sample would have been placed if not sampled	Not set	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2025-16	Date Created	04/21/2025
JMF Submittal ID	JMF3511-22-2025-15	JMF Status	Submittal Authorized For Use
Producer Mix ID	18-1001.305-23.6_	Authorized Date	04/21/2025

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2023-05-15-126-1	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Dennis Hickey and Josh Murphy, CT D02 - Redding Northern Regional Laboratory	05/25/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	06/01/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Sean McWithey, CT D02 - Redding Northern Regional Laboratory	05/24/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/25/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Dennis Hickey and Josh Murphy, CT D02 - Redding Northern Regional Laboratory	05/24/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-6	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/25/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/23/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-8	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/25/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-9	AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)	Ryan Kester, J. Horton, and W. Jenkins, CT D02 - Redding Northern Regional Laboratory	06/27/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible
2023-05-15-126-10	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Josh Murphy, CT D02 - Redding Northern Regional Laboratory	05/24/2023	04/21/2025	Yes	04/21/2025	Submitted from JMF - Ward Jenkins	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-05-15-126-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-05-15-126-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-05-15-126-3 AASHTO T176-08 (Verified)
DIME Test ID: 2023-05-15-126-4 AASHTO T304-11 (Verified)
DIME Test ID: 2023-05-15-126-5 ASTM D4791-10 (Verified)
DIME Test ID: 2023-05-15-126-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2023-05-15-126-7 AASHTO T85-13 (Verified)
DIME Test ID: 2023-05-15-126-8 AASHTO T84-14 (Verified)
DIME Test ID: 2023-05-15-126-9 AASHTO T104-99r16 (Verified)
DIME Test ID: 2023-05-15-126-10 AASHTO T210-15 (Verified)