DIME » All Projects » Project - DEA: 030F3104 » Sample 2017-06-20-3 » Sample Details

Sample Record

Owner Labs

  • CT HQ - QASI Bay Area Field Office
  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-06-20-3

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211588
DEA: 030F3104
EFIS: 0300000078
DIST-CO-RTE-PM03-ED-49-23.6/24.5
Award Date12/12/2016
Closeout Date01/08/2019
Work DescriptionREPLACE BRIDGE.
Location DescriptionEL DORADO COUNTY NEAR COLOMA FROM 0.1 MILE EAST OF MARSHALL ROAD TO 0.3 MILE EAST OF LOTUS ROAD
QA Service Level1 (Verified on 10/19/2016)

Sample Information

Sample Taken Date06/20/2017 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/20/2017
Sample typeVerification A brief description of the sample3/4 x 5 1/2 A325 bolt,nut,washer
The quantity of what the sample constitutes9 and 12 From where was the sample collectedFabricator
First name of sampler or witnessed byDavid Last name of sampler or witnessed byFlygare
Title of samplerCA METS QA Inspector Telephone number of sampler(801) 669-2984
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameUIS Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormB76-063-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)n/a
Heat Number(s)Bolt NF16100930, nut 20388020, FW 542102 Nut Mfg. Lot Number(s)Decker 15-40-006
Washer Mfg. Lot Number(s)D2020 Bolt SpecificationA325
Bolt Length(s)5 1/2" Nut SpecificationA563-DH
Washer SpecificationF436 FinishHDG
Diameter/Size3/4" x 5 1/2" Bolt Mfg. Lot NumberG8505
Rocap Test Requirement(s)none Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-06-20-3-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017Nut Proof Load
2017-06-20-3-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017Nut Proof Load
2017-06-20-3-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017Nut Proof Load
2017-06-20-3-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017Nut Proof Load
2017-06-20-3-5ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017A325
2017-06-20-3-10ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017A449 Headed Bolt w/10 Degree Wedge
2017-06-20-3-11ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian
Yes
07/05/2017A449 Headed Bolt w/10 Degree Wedge
2017-06-20-3-12ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian Ewing
Yes
07/05/2017
2017-06-20-3-13ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian Ewing
Yes
07/05/2017
2017-06-20-3-14ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory06/28/2017Brian Ewing
Yes
07/05/2017
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-06-20-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-20-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-20-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-20-3-4 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-20-3-5 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-20-3-10 ASTM F606-14 (Verified)
DIME Test ID: 2017-06-20-3-11 ASTM F606-14 (Verified)
DIME Test ID: 2017-06-20-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-27 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-28 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-29 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-20-3-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-31 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-32 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-33 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-34 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-35 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-36 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-37 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-38 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-39 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-40 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-41 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-42 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-43 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-44 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-45 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-46 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-47 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-48 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-49 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-50 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-51 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-52 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-53 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-54 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-55 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-56 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-57 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-20-3-58 ASTM E18-15 (Verified)
DIME Test ID: 2017-06-20-3-59 ASTM E18-15 (Verified)
DIME Test ID: 2017-06-20-3-60 ASTM E18-15 (Verified)
DIME Test ID: 2017-06-20-3-61 ASTM E18-15 (Verified)
DIME Test ID: 2017-06-20-3-62 ASTM E18-15 (Verified)
DIME Test ID: 2017-06-20-3-63 ASTM E18-15 (Verified)