Sample Record
Owner Lab
- CT HQ - QASI Bay Area Field Office
DIME Sample ID 2025-03-18-4
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994358 DEA: 033J3304 EFIS: 0322000251 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-12-0/0.5 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | MMBN Project. Replace backup drive system, replace lift span deck, install hydraulic barrier system and new generator, replace electrical control system, install new traffic gates and elevators, traffic control, |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 10/25/2022) |
Sample Information
| Sample Taken Date | 03/18/2025 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 03/18/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 7/8"-9 x 1/2" |
| The quantity of what the sample constitutes | 3 | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Garcia Arreola |
| Title of sampler | AMR | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Bay Bolt Oakland, Ca | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 8447-01 |
|---|---|---|---|
| Heat Number(s) | 10797330 1000226400 32028550 | Nut Mfg. Lot Number(s) | W000172798 |
| Washer Mfg. Lot Number(s) | 176212 | Bolt Specification | ASTM F3125 |
| Bolt Length(s) | 2-1/2 | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | Hot Dip Galvanized |
| Diameter/Size | 7/8-9 | Bolt Mfg. Lot Number | E727I1 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Submitted Tests
Test File Attachments
DIME Test ID: 2025-03-18-4-1 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-18-4-2 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-18-4-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-18-4-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-18-4-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-18-4-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-18-4-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-18-4-16 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-17 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-18 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-19 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-20 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-21 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-22 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-23 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-24 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-18-4-25 ASTM F606-21 (Verified)