DIME - Sample Record for DIME Sample ID 2025-03-06-24

DIME » All Projects » Project - DEA: 081C08U4 » Sample 2025-03-06-24 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2025-03-06-24

Project Information

Project Identifiers	Project ID: 994586 DEA: 081C08U4 EFIS: 0822000142
DIST-CO-RTE-PM	08-RIV-10-R134.0/R156.5
Award Date	06/22/2023
Closeout Date	Not set
Work Description	PLACE HMA (TYPE A), JPCP, IMPORTED BORROW, ROADWAY EXCAVATION & CL2 AB
Location Description	RIVERSIDE COUNTY FROM 1.1 MILES WEST OF WILEY WELL ROAD OVERCROSSING TO CALIFORNIA/ARIZONA STATE LINE
QA Service Level	1 (Verified on 08/02/2023)

Sample Information

Sample Taken Date	03/06/2025	Sample Unique Key	24
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/10/2025
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA A SP R24 1.0% LSM
The quantity of what the sample constitutes	6 bags virgin agg, 3 bags lime treated agg, 2 bags of coldfeed, 1 bag of ea RAP (coarse and fine)	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Alberto	Last name of sampler or witnessed by	Gonzalez
Title of sampler		Telephone number of sampler
Laboratory sample identification	0157A-25	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Ehrenburg Pit/ Holly Frontier/ LHoist/ Project Roadway	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	EHRENBERG PIT CM203
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	belt cut at FISHER SAND AND GRAVEL TEMPE AZ
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	CA125MA	Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2025-03-06-24-1	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	David Padilla, CT D08 - Fontana Southern Regional Laboratory	03/14/2025	08/29/2025	Yes	01/30/2026	Rap Gradation After Ignition	Public - Test Data Visible
2025-03-06-24-2	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	David Padilla/ D.M./RJ, CT D08 - Fontana Southern Regional Laboratory	03/17/2025	08/29/2025	Yes	01/30/2026	Combined L.T. Agg. Gradation W/Rap Gradation Correlation Factors	Public - Test Data Visible
2025-03-06-24-3	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	David Padilla/ D.M./R.J., CT D08 - Fontana Southern Regional Laboratory	03/15/2025	08/29/2025	Yes	01/30/2026	Combined L.T. Agg. Gradation w/Rap Gradation Correlation Factors	Public - Test Data Visible
2025-03-06-24-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	03/14/2025	08/29/2025	Yes	01/30/2026		Public - Test Data Visible
2025-03-06-24-5	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	03/15/2025	08/29/2025	Yes	01/30/2026		Public - Test Data Visible
2025-03-06-24-6	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	E.J., CT D08 - Fontana Southern Regional Laboratory	03/14/2025	08/29/2025	Yes	01/30/2026		Public - Test Data Visible
2025-03-06-24-7	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Robert Guillen, CT D08 - Fontana Southern Regional Laboratory	03/13/2025	08/29/2025	Yes	01/30/2026		Public - Test Data Visible
2025-03-06-24-8	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Ronica B, CT D08 - Fontana Southern Regional Laboratory	03/14/2025	08/29/2025	Yes	01/30/2026		Public - Test Data Visible
2025-03-06-24-9	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Ronica B, CT D08 - Fontana Southern Regional Laboratory	03/14/2025	08/29/2025	Yes	01/30/2026	The FAA is below spec	Public - Test Data Visible
2025-03-06-24-10	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Ronica B, CT D08 - Fontana Southern Regional Laboratory	03/14/2025	08/29/2025	Yes	01/30/2026		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2025-03-06-24-1 CTM 202-November 2011 (Verified)
DIME Test ID: 2025-03-06-24-2 CTM 202-November 2011 (Verified)
DIME Test ID: 2025-03-06-24-3 AASHTO T27-14 (Verified)
DIME Test ID: 2025-03-06-24-4 AASHTO T84-14 (Verified)
DIME Test ID: 2025-03-06-24-5 AASHTO T85-13 (Verified)
DIME Test ID: 2025-03-06-24-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2025-03-06-24-7 AASHTO T176-08 (Verified)
DIME Test ID: 2025-03-06-24-8 AASHTO T335-09r13 (Verified)
DIME Test ID: 2025-03-06-24-9 AASHTO T304-11 (Verified)
DIME Test ID: 2025-03-06-24-10 ASTM D4791-10 (Verified)