Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-02-26-15
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000681 DEA: 081J7204 EFIS: 0818000099 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-S0.0/S0.8,0.0/R15.0 |
| Award Date | 01/17/2025 |
| Closeout Date | Not set |
| Work Description | REPLACE AC SURFACING, COLD PLANE AC PAVEMENT, HMA, RSP, AND MGS. |
| Location Description | SAN BERNARDINO COUNTY IN AND NEAR BARSTOW FROM 0.1 MILE WEST OF ROBERTA STREET TO MONTARA ROAD AND FROM ROUTE 15 TO 0.4 MILE EAST OF LAVA WASH BRIDGE |
| QA Service Level | 1 (Verified on 01/13/2025) |
Sample Information
| Sample Taken Date | 02/26/2025 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/28/2025 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R25 LSM 1.0% |
| The quantity of what the sample constitutes | 3 bags comb LT Agg, 3 bags of each bin size virgin agg, 2 bags of RAP | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Alex | Last name of sampler or witnessed by | Samano |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0143A-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | LHoist North America/ Wor/ Agcon/ Calport/ Blue Diamond | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Calportland Scheerer Quarry |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Victorville Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 300154 R25 LSM PG64-16 | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-02-26-15-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 03/03/2025 | 08/28/2025 | No | Rap Gradation After Ignition | Public - Test Data Visible | ||
| 2025-02-26-15-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla/D.M., CT D08 - Fontana Southern Regional Laboratory | 03/11/2025 | 08/28/2025 | No | Comb. Virgin Agg. Gradation W/Rap Gradation Correlation Factors | Public - Test Data Visible | ||
| 2025-02-26-15-3 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | David Padilla/ D.M., CT D08 - Fontana Southern Regional Laboratory | 03/11/2025 | 08/28/2025 | No | Combined Virgin Aggregate Gradation | Public - Test Data Visible | ||
| 2025-02-26-15-4 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 03/12/2025 | 08/28/2025 | No | The FAA is out of spec | Public - Test Data Visible | ||
| 2025-02-26-15-5 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 03/12/2025 | 08/28/2025 | No | Public - Test Data Visible | |||
| 2025-02-26-15-6 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 03/12/2025 | 08/28/2025 | No | Public - Test Data Visible | |||
| 2025-02-26-15-7 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 03/08/2025 | 08/28/2025 | No | Public - Test Data Visible | |||
| 2025-02-26-15-8 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | M.M., CT D08 - Fontana Southern Regional Laboratory | 03/11/2025 | 08/28/2025 | No | Public - Test Data Visible | |||
| 2025-02-26-15-9 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | E.J., CT D08 - Fontana Southern Regional Laboratory | 03/12/2025 | 08/28/2025 | No | Public - Test Data Visible | |||
| 2025-02-26-15-10 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 03/12/2025 | 08/28/2025 | No | Public - Test Data Visible |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-02-26-15-1 CTM 202-November 2011
DIME Test ID: 2025-02-26-15-2 CTM 202-November 2011
DIME Test ID: 2025-02-26-15-3 AASHTO T27-14
DIME Test ID: 2025-02-26-15-4 AASHTO T304-11
DIME Test ID: 2025-02-26-15-5 AASHTO T335-09r13
DIME Test ID: 2025-02-26-15-6 ASTM D4791-10
DIME Test ID: 2025-02-26-15-7 AASHTO T84-14
DIME Test ID: 2025-02-26-15-8 AASHTO T85-13
DIME Test ID: 2025-02-26-15-9 AASHTO T96-02r10
DIME Test ID: 2025-02-26-15-10 AASHTO T176-08