Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-01-27-20
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994586 DEA: 081C08U4 EFIS: 0822000142 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-R134.0/R156.5 |
| Award Date | 06/22/2023 |
| Closeout Date | Not set |
| Work Description | PLACE HMA (TYPE A), JPCP, IMPORTED BORROW, ROADWAY EXCAVATION & CL2 AB |
| Location Description | RIVERSIDE COUNTY FROM 1.1 MILES WEST OF WILEY WELL ROAD OVERCROSSING TO CALIFORNIA/ARIZONA STATE LINE |
| QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
| Sample Taken Date | 01/27/2025 | Sample Unique Key | 20 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/03/2025 |
| Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R24 1.0% LSM PG64-28M (Virgin PG58-34M) |
| The quantity of what the sample constitutes | 2 Bags EA Virgin (3/4, 3/8, Sand) 3 Bags LT CF 1 Bag EA RAP (Coarse, Fine) 1 Bag EA LT (3/8, Sand) | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | ALBERTO | Last name of sampler or witnessed by | Pineda-Gonzalez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0124A-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Ehrenburg Pit/ Holly Frontier/ LHoist/ Project Roadway | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | EHRENBERG PIT CM203 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | belt cut at FISHER SAND AND GRAVEL TEMPE AZ | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | CA125MA | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-01-27-20-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Ronica B/David Padilla, CT D08 - Fontana Southern Regional Laboratory | 02/11/2025 | 04/24/2025 | No | Comb. L.T. Aggregate Gradation W/Rap Gradation Correlation Factors | |||
| 2025-01-27-20-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 02/09/2025 | 04/24/2025 | No | Rap Gradation After Ignition | |||
| 2025-01-27-20-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 02/09/2025 | 04/24/2025 | No | ||||
| 2025-01-27-20-4 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 02/08/2025 | 04/24/2025 | No | ||||
| 2025-01-27-20-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 02/07/2025 | 04/24/2025 | No | ||||
| 2025-01-27-20-6 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 04/24/2025 | 04/24/2025 | No | Comb. L.T. Aggregate Gradation | |||
| 2025-01-27-20-7 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 02/09/2025 | 04/24/2025 | No | ||||
| 2025-01-27-20-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla/RB, CT D08 - Fontana Southern Regional Laboratory | 02/08/2025 | 04/24/2025 | No | The FAA is below spec. | |||
| 2025-01-27-20-9 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla/RB, CT D08 - Fontana Southern Regional Laboratory | 02/08/2025 | 04/24/2025 | No | ||||
| 2025-01-27-20-10 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Ronica B/David Padilla, CT D08 - Fontana Southern Regional Laboratory | 02/08/2025 | 04/24/2025 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-01-27-20-1 CTM 202-November 2011
DIME Test ID: 2025-01-27-20-2 CTM 202-November 2011
DIME Test ID: 2025-01-27-20-3 AASHTO T176-08
DIME Test ID: 2025-01-27-20-4 AASHTO T85-13
DIME Test ID: 2025-01-27-20-5 AASHTO T84-14
DIME Test ID: 2025-01-27-20-6 AASHTO T27-14
DIME Test ID: 2025-01-27-20-7 AASHTO T96-02r10
DIME Test ID: 2025-01-27-20-8 AASHTO T304-11
DIME Test ID: 2025-01-27-20-9 AASHTO T335-09r13
DIME Test ID: 2025-01-27-20-10 ASTM D4791-10