Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-10-21-26
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000266 DEA: 070W6304 EFIS: 0722000332 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-33,101,118,126-Var |
| Award Date | 06/26/2024 |
| Closeout Date | 06/09/2025 |
| Work Description | METHACRYLATE, POLYESTER OVERLAY, AND SLOPE REPAIR. |
| Location Description | VENTURA COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 04/17/2024) |
Sample Information
| Sample Taken Date | 10/21/2024 | Sample Unique Key | 26 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/23/2024 |
| Sample type | Production Start-Up | A brief description of the sample | 3/8" WMA A SP R25 0.25% EVO |
| The quantity of what the sample constitutes | 3 BAGS OF AGG, 2 BAGS OF RAP | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Hurtado |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0572A-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | vulcan saticoy | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035,91-19-0020 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | 3 BAGS OF AGG, 2 BAGS OF RAP | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | 420200W SAT SJR | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2024-10-21-26-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | M.Campos/ S.M., CT D08 - Fontana Southern Regional Laboratory | 11/01/2024 | 11/05/2024 | No | Combined Virgin Aggregate Gradation | |||
| 2024-10-21-26-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 10/26/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 10/26/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 10/29/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 10/28/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/29/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/29/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/29/2024 | 11/05/2024 | No | ||||
| 2024-10-21-26-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 10/31/2024 | 11/05/2024 | No | Rap Gradation After Ignition | |||
| 2024-10-21-26-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | M.Campos/David Padilla/RG, CT D08 - Fontana Southern Regional Laboratory | 11/01/2024 | 11/05/2024 | No | Combined Virgin Aggregate Gradation W/Rap Gradation Correlation Factors |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-10-21-26-1 AASHTO T27-14
DIME Test ID: 2024-10-21-26-2 AASHTO T84-14
DIME Test ID: 2024-10-21-26-3 AASHTO T85-13
DIME Test ID: 2024-10-21-26-4 AASHTO T96-02r10
DIME Test ID: 2024-10-21-26-5 AASHTO T176-08
DIME Test ID: 2024-10-21-26-6 AASHTO T304-11
DIME Test ID: 2024-10-21-26-7 AASHTO T335-09r13
DIME Test ID: 2024-10-21-26-8 ASTM D4791-10
DIME Test ID: 2024-10-21-26-9 CTM 202-November 2011
DIME Test ID: 2024-10-21-26-10 CTM 202-November 2011