DIME » All Projects » Project - DEA: 024J9204 » Sample 2024-07-31-128 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2024-07-31-128

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000090
DEA: 024J9204
EFIS: 0223000087
DIST-CO-RTE-PM02-TRI-299-61.0/64.0,70.0/72.2
Award Date04/16/2024
Closeout Date11/27/2024
Work DescriptionASPHALT RUBBER CHIP SEAL WITH REPLACE ASPHALT CONCRETE SURFACING.
Location DescriptionTRINITY COUNTY NEAR DOUGLAS CITY FROM STEEL BRIDGE ROAD TO 1.5 MILES WEST OF GRASS VALLEY CREEK BRIDGE NO 05-0013 AND FROM 2.6 MILES EAST OF TRINITY DAM BOULEVARD TO THE SHASTA COUNTY LINE
QA Service Level1 (Verified on 03/18/2024)

Sample Information

Sample Taken Date07/31/2024 Sample Unique Key128
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/31/2024
Sample typeProduction Start-Up A brief description of the sample1/2 HMA Type A w/25% RAP PG58-22 Valero
The quantity of what the sample constitutesPSE 16 boxs From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79677 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis Inc. - Northstate Asphalt (Redding CA) Transportation Laboratory (TL) Number858504
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2024-07-31-128-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory08/01/202410/22/2024
Yes
10/22/2024Gmm=2.514Public - Test Data Visible
2024-07-31-128-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory08/01/202410/22/2024
Yes
10/22/2024Gmb=2.418Public - Test Data Visible
2024-07-31-128-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy , CT D02 - Redding Northern Regional Laboratory08/01/202410/22/2024
Yes
10/22/2024Pa=3.8Public - Test Data Visible
2024-07-31-128-4AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Josh Murphy , CT D02 - Redding Northern Regional Laboratory10/22/202410/22/2024
Yes
10/22/2024S1=148 psi, S2=144 psi, TSR=97%Public - Test Data Visible
2024-07-31-128-5AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Sean Mcwithey, CT D02 - Redding Northern Regional Laboratory10/17/202410/22/2024
Yes
10/22/2024Pb=5.28%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-07-31-128-1 AASHTO T209-12 (Verified)
DIME Test ID: 2024-07-31-128-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-07-31-128-3 AASHTO T269-14 (Verified)
DIME Test ID: 2024-07-31-128-4 AASHTO T283-14 (Verified)
DIME Test ID: 2024-07-31-128-5 AASHTO T308-10 (Verified)