Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-10-14-45
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 214649 DEA: 07316004 EFIS: 0715000194 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-14-60.70 |
| Award Date | 02/07/2023 |
| Closeout Date | Not set |
| Work Description | REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES. |
| Location Description | ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE. |
| QA Service Level | 1 (Verified on 01/29/2020) |
Sample Information
| Sample Taken Date | 10/14/2024 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/17/2024 |
| Sample type | Verification | A brief description of the sample | 3/4''HMA-A-SP R15 0.50%LAS |
| The quantity of what the sample constitutes | 2Bags EA of 3/4,1/2,3/8,Wash dust,2 bags rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Thomas | Last name of sampler or witnessed by | Shivers |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Fish Canyon IRW/ Palmdale Quarry/ Morlife 5000/ Valero | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0020,91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt C | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 221534 pal vlo |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2024-10-14-45-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | R. Guillen, CT D08 - Fontana Southern Regional Laboratory | 10/21/2024 | 11/08/2024 | No | Combined Virgin Aggregate Gradation | |||
| 2024-10-14-45-13 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | F.O., CT D08 - Fontana Southern Regional Laboratory | 10/23/2024 | 11/08/2024 | No | ||||
| 2024-10-14-45-14 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | R. Guillen, CT D08 - Fontana Southern Regional Laboratory | 10/21/2024 | 11/08/2024 | No | ||||
| 2024-10-14-45-15 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | R. Guillen, CT D08 - Fontana Southern Regional Laboratory | 10/24/2024 | 11/08/2024 | No | ||||
| 2024-10-14-45-16 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | R.Bhuyian, CT D08 - Fontana Southern Regional Laboratory | 10/24/2024 | 11/08/2024 | No | ||||
| 2024-10-14-45-17 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Tran, CT D08 - Fontana Southern Regional Laboratory | 10/26/2024 | 11/08/2024 | No | RAP Gradation after ignition | |||
| 2024-10-14-45-18 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/25/2024 | 11/08/2024 | No | Comb. Virgin Aggregate Gradation w/Rap Gradation Correlation | |||
| 2024-10-14-45-19 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/26/2024 | 11/08/2024 | No | ||||
| 2024-10-14-45-20 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/26/2024 | 11/08/2024 | No | ||||
| 2024-10-14-45-21 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/26/2024 | 11/08/2024 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-10-14-45-1 AASHTO T27-14
DIME Test ID: 2024-10-14-45-13 AASHTO T84-14
DIME Test ID: 2024-10-14-45-14 AASHTO T85-13
DIME Test ID: 2024-10-14-45-15 AASHTO T96-02r10
DIME Test ID: 2024-10-14-45-16 AASHTO T176-08
DIME Test ID: 2024-10-14-45-17 CTM 202-November 2011
DIME Test ID: 2024-10-14-45-18 CTM 202-November 2011
DIME Test ID: 2024-10-14-45-19 AASHTO T304-11
DIME Test ID: 2024-10-14-45-20 AASHTO T335-09r13
DIME Test ID: 2024-10-14-45-21 ASTM D4791-10