Sample Record
DIME Sample ID 2017-02-21-1
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 209141 DEA: 07215954 EFIS: 0700001835 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-0.0/7.6 |
| Award Date | 04/24/2014 |
| Closeout Date | 07/14/2022 |
| Work Description | WIDENING FREEWAY AND RECONSTRUCT OVERHEAD AND OVERCROSSING STRUCTURES |
| Location Description | LOS ANGELES COUNTY IN LA MIRADA, SANTA FE SPRINGS, NORWALK AND DOWNEY FROM ORANGE COUNTY/LOS ANGELES COUNTY LIMIT LINES TO 0.7 MILE NORTH OF ROUTE 605 |
| QA Service Level | 1 (Verified on 06/02/2014) |
Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Information
| Sample Taken Date | 02/21/2017 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 02/22/2017 | Sample type | Department Acceptance |
| A brief description of the sample | A449 Bolt, Nut, Washer. | The quantity of what the sample constitutes | 9 |
| From where was the sample collected | Distributor | First name of sampler or witnessed by | T |
| Last name of sampler or witnessed by | Mclaurin | Title of sampler | QAI |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Portland Bolt |
| Transportation Laboratory (TL) Number | C953187 | Inspector Lot Number from the Transportation Laboratory (TL) Form | L6702717 |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 3065481 | Nut Mfg. Lot Number(s) | 23468-75062745 |
| Washer Mfg. Lot Number(s) | 0616-264 | Bolt Specification | ASTM A449 |
| Bolt Length(s) | 16.375 | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | ASTM A153/F2329 - Hot Dip |
| Diameter/Size | 0.875 | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Submitted Tests
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2017-02-21-1-1 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-02-21-1-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-02-21-1-22 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-23 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-24 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-25 ASTM F606-14a (Verified)
DIME Test ID: 2017-02-21-1-26 ASTM F606-14a (Verified)
DIME Test ID: 2017-02-21-1-27 ASTM F606-14 (Verified)
DIME Test ID: 2017-02-21-1-28 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-29 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-30 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-31 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-32 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-33 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-34 ASTM E18-15 (Verified)
DIME Test ID: 2017-02-21-1-35 ASTM E18-15 (Verified)