Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-09-13-24
Project Information
| Project Identifiers | Project ID: 1000253 DEA: 070W4504 EFIS: 0722000060 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-138-50.0/63.7 |
| Award Date | 06/13/2024 |
| Closeout Date | 05/07/2025 |
| Work Description | PLACE HMA (TYPE A) AND COLD PLANE ASPHALT CONCRETE PAVEMENT. |
| Location Description | LOS ANGELES COUNTY IN AND NEAR PALMDALE FROM 0.1 MILE SOUTH OF AVENUE S TO 0.1 MILE EAST OF 165TH STREET EAST |
| QA Service Level | 1 (Verified on 09/16/2024) |
Sample Information
| Sample Taken Date | 09/13/2024 | Sample Unique Key | 24 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/17/2024 |
| Sample type | Verification | A brief description of the sample | PSUE 3/8" WMA SP R20 0.25% EVO |
| The quantity of what the sample constitutes | 2 Bags each Agg (3/8", Washed Fines, RAP) | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Avo | Last name of sampler or witnessed by | Karajian |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0476A-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Ingevity/ Valero/ Fish Canyon Irwindale/ Palmdale Quarry/ Vulcan Palmdale | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035, 91-19-0020, 91-33-0027 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials - Palmdale | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/8 inch |
| The concrete mix design number | 420911 | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2024-09-13-24-1 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 09/19/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-2 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/20/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-3 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 09/21/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-4 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/20/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-5 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla/RB, CT D08 - Fontana Southern Regional Laboratory | 09/25/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-6 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla/RB, CT D08 - Fontana Southern Regional Laboratory | 09/25/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla/RB, CT D08 - Fontana Southern Regional Laboratory | 09/25/2024 | 10/22/2024 | No | ||||
| 2024-09-13-24-8 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Tran, CT D08 - Fontana Southern Regional Laboratory | 09/21/2024 | 10/22/2024 | No | Rap Gradation After Ignition | |||
| 2024-09-13-24-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Robert Guillen/S.M./D.T., CT D08 - Fontana Southern Regional Laboratory | 09/26/2024 | 10/22/2024 | No | Comb. Virgin Agg, Gradation W/Rap Gradation Correlation Factors | |||
| 2024-09-13-24-10 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | RG/SM, CT D08 - Fontana Southern Regional Laboratory | 09/27/2024 | 10/22/2024 | No | Comb. Virgin Aggregate Gradation After Ignition |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-09-13-24-1 AASHTO T84-14
DIME Test ID: 2024-09-13-24-2 AASHTO T85-13
DIME Test ID: 2024-09-13-24-3 AASHTO T96-02r10
DIME Test ID: 2024-09-13-24-4 AASHTO T176-08
DIME Test ID: 2024-09-13-24-5 AASHTO T304-11
DIME Test ID: 2024-09-13-24-6 AASHTO T335-09r13
DIME Test ID: 2024-09-13-24-7 ASTM D4791-10
DIME Test ID: 2024-09-13-24-8 CTM 202-November 2011
DIME Test ID: 2024-09-13-24-9 CTM 202-November 2011
DIME Test ID: 2024-09-13-24-10 AASHTO T27-14
