DIME - Sample Record for DIME Sample ID 2019-07-15-2

DIME » All Projects » Project - DEA: 04013584 » Sample 2019-07-15-2 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2019-07-15-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213267 DEA: 04013584 EFIS: 0416000289
DIST-CO-RTE-PM	04-SF-80-8.0/8.3,0.9/1.4
Award Date	03/29/2018
Closeout Date	12/30/2019
Work Description	Pier Retention
Location Description	In San Francisco and Alameda Counties on Yerba Buena Island and .4 miles west of Oakland Toll plaza
QA Service Level	1 (Verified on 05/01/2018)

Sample Information

Sample Taken Date	07/15/2019	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/10/2019
Sample type	Quality Assurance	A brief description of the sample	F1554 Anchor Rods Nut Washers
The quantity of what the sample constitutes	1 lot of 100	From where was the sample collected	Job Site
First name of sampler or witnessed by	Stacey	Last name of sampler or witnessed by	Davis
Title of sampler	QAI	Telephone number of sampler	562 480-6984
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Portland Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B362-045-19	Structure unique identifier	33-0025
Structure name	SFOBB Pier Retention

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	None
Heat Number(s)	10514370 ATR 10466960 HH 31835900 Washer	Nut Mfg. Lot Number(s)	18-04-008
Washer Mfg. Lot Number(s)	0119-045	Bolt Specification	F1554, Grade 105
Bolt Length(s)	10"	Nut Specification	A563, Gr DH
Washer Specification	F436	Finish	HDG
Diameter/Size	1/2"	Bolt Mfg. Lot Number	None
Rocap Test Requirement(s)	none	Lubricant Requirements(s)	wax and dye

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-07-15-2-1	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	bewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	bewing	Yes	09/12/2019	F1554 Gr 105
2019-07-15-2-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	bewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	bewing	Yes	09/12/2019	Nut Proof
2019-07-15-2-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-4	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-6	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-7	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-8	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019
2019-07-15-2-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/12/2019	Brian Ewing	Yes	09/12/2019

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-07-15-2-1 ASTM F606-14 (Verified)
DIME Test ID: 2019-07-15-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-07-15-2-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-07-15-2-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-07-15-2-18 ASTM E18-15 (Verified)
DIME Test ID: 2019-07-15-2-19 ASTM E18-15 (Verified)