Sample Record
Owner Lab
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2026-04-24-86
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001245 DEA: 040AA624 EFIS: 0419000518 |
|---|---|
| DIST-CO-RTE-PM | 04-SF-1-0.9/5.8 |
| Award Date | 07/23/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PVMT, HMA (TYPE A) AND INDIVIDUAL SLAB REPLACEMENT. |
| Location Description | THE CITY AND COUNTY OF SAN FRANCISCO FROM HOLLOWAY AVENUE TO CALIFORNIA STREET |
| QA Service Level | 1 (Verified on 10/23/2025) |
Sample Information
| Sample Taken Date | 04/24/2026 | Sample Unique Key | 86 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/24/2026 |
| Sample type | Production Start-Up | A brief description of the sample | 1/2 HMA + 15% RAP |
| The quantity of what the sample constitutes | 5 Bags Combined Aggregate | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Rob | Last name of sampler or witnessed by | Lohman |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D04-SE-26-008 | Linked DIME Sample ID | 2026-04-24-87 |
| The fabricator/manufacturer/facility name | Peninsula Road Materials-RC | Transportation Laboratory (TL) Number | CPL042426B |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-35-0012 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Conveyor Belt | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 373 |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-04-24-86-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 05/01/2026 | 06/10/2026 | No | Coarse, 2 faced=100%, Coarse, 1 faced=100%, Fine, 1 faced=100% | |||
| 2026-04-24-86-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 04/30/2026 | 06/10/2026 | No | Grading C, 100 revolutions= 7.8%, 500 revolutions= 30.4% | |||
| 2026-04-24-86-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 05/01/2026 | 06/10/2026 | No | Average uncompacted voids= 44.9% | |||
| 2026-04-24-86-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 05/01/2026 | 06/10/2026 | No | Flat and elongated particles=0% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-04-24-86-1 AASHTO T335-09r13
DIME Test ID: 2026-04-24-86-2 AASHTO T96-02r10
DIME Test ID: 2026-04-24-86-3 AASHTO T304-11
DIME Test ID: 2026-04-24-86-4 ASTM D4791-10