DIME - Sample Record for DIME Sample ID 2025-09-22-43

DIME » All Projects » Project - DEA: 112N1684 » Sample 2025-09-22-43 » Sample Details

Sample Record

Owner Lab

CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-09-22-43

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 1001055 DEA: 112N1684 EFIS: 1122000281
DIST-CO-RTE-PM	11-SD-5-R53.9/R63.7
Award Date	05/02/2025
Closeout Date	Not set
Work Description	POLYESTER CONCRETE, METHACRYLATE, JOINT SEALS AND APPROACH SLABS.
Location Description	SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM ROUTE 5/76 SEPARATION TO AGRA OVERHEAD
QA Service Level	1 (Verified on 06/03/2025)

Sample Information

Sample Taken Date	09/22/2025	Sample Unique Key	43
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/29/2025
Sample type	Production Start-Up	A brief description of the sample	PSU
The quantity of what the sample constitutes	12 boxes	From where was the sample collected	Supplier
First name of sampler or witnessed by	Mohammed	Last name of sampler or witnessed by	Masud
Title of sampler	TET	Telephone number of sampler	6199021073
Laboratory sample identification	25-09-22-43-PSU	Linked DIME Sample ID	2025-09-22-44
The fabricator/manufacturer/facility name	Vulcan Otay	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	1/2 inch	Lot number
Sublot number		HMA Mix Number	320200 Otay Val
Binder content (%)	4.9	Virgin binder PG	PG58-16
Design binder PG	PG 64-16	Binder Supplier	Valero
RAP content (%)	22	WMA Additives	No
Antistrip type	No

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2025-09-22-43-1	AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Daniel Smith, CT D11 - District 11 Materials Laboratory	10/13/2025	10/13/2025	Yes	10/15/2025	Does Not Comply - Target 4.90% ,Tested twice in two different ovens and both FAILED 1- 5.79% 2- 5.58% Saved material for T30	Public - Test Data Visible
2025-09-22-43-2	AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	10/13/2025	10/13/2025	Yes	10/15/2025	Complies Target 2.495 Tested 2.508	Public - Test Data Visible
2025-09-22-43-4	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	10/13/2025	10/13/2025	Yes	10/15/2025	Complies Target within .96	Public - Test Data Visible
2025-09-22-43-5	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Daniel Smith, CT D11 - District 11 Materials Laboratory	10/13/2025	10/13/2025	Yes	10/15/2025	Complies Target 4.0% +/- 1.5% Tested an Avg of 5.1%	Public - Test Data Visible
2025-09-22-43-6	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Daniel Smith, CT D11 - District 11 Materials Laboratory	10/16/2025	10/16/2025	Yes	10/16/2025	Complies Target WET - 70. psi tested 127 psi / DRY - 100 psi - Tested 208 psi	Public - Test Data Visible
2025-09-22-43-7	CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt	Daniel Smith, CT D11 - District 11 Materials Laboratory	10/16/2025	10/16/2025	Yes	10/16/2025	Complies Target < 12.7 mm Tested an Avg of 1.74 mm	Public - Test Data Visible
2025-09-22-43-8	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	10/14/2025	10/14/2025	Yes	10/15/2025	RAP RAP	Public - Test Data Visible
2025-09-22-43-9	CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)	Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	12/05/2025	12/04/2025	Yes	12/09/2025

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2025-09-22-43-1 AASHTO T308-25 (Verified)
DIME Test ID: 2025-09-22-43-2 AASHTO T209-25 (Verified)
DIME Test ID: 2025-09-22-43-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-09-22-43-5 AASHTO T269-14 (Verified)
DIME Test ID: 2025-09-22-43-6 AASHTO T283-14 (Verified)
DIME Test ID: 2025-09-22-43-7 CTM 389-19 (Verified)
DIME Test ID: 2025-09-22-43-8 AASHTO T308-10 (Verified)
DIME Test ID: 2025-09-22-43-9 CTM 375-February 2012 (Verified)