Sample Record
Owner Lab
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2024-12-18-53
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 993333 DEA: 04264724 EFIS: 0419000068 |
|---|---|
| DIST-CO-RTE-PM | 04-MRN-101-R20.8/27.1 |
| Award Date | 04/26/2022 |
| Closeout Date | Not set |
| Work Description | CIP BRIDGES, CONSTRUCT ROADWAY, RETAINING WALLS AND MODIFY ELECTRICAL. |
| Location Description | MARIN COUNTY IN AND NEAR NOVATO FROM 0.1 MILE SOUTH OF FRANKLIN AVENUE OVERHEAD TO 0.5 MILE SOUTH OF SAN ANTONIO CREEK BRIDGE |
| QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
| Sample Taken Date | 12/18/2024 | Sample Unique Key | 53 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/14/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 3/4 HMA-WMA |
| The quantity of what the sample constitutes | 4 bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | MATTHEW | Last name of sampler or witnessed by | James |
| Title of sampler | QC Manager | Telephone number of sampler | |
| Laboratory sample identification | D04-SE-25-001 | Linked DIME Sample ID | 2024-12-18-54 |
| The fabricator/manufacturer/facility name | Dutra San Rafael | Transportation Laboratory (TL) Number | C100558-100559 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L13 SL15 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-21-0008 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Conveyer Belt-HMA Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | 13 | |
| Sublot number | 15 | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2024-12-18-53-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | WAI YIN LAM, CT D04 - Hayward DME / District Laboratory | 08/04/2025 | 08/04/2025 | No | Coarse 2 faced - 99.7%, Coarse 1 faced - 100%, Fine 1 faced - 100% | |||
| 2024-12-18-53-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | WAI YIN LAM, CT D04 - Hayward DME / District Laboratory | 08/04/2025 | 08/04/2025 | No | 100 revolutions - 4.8%, 500 revolutions - 20.8% | |||
| 2024-12-18-53-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | WAI YIN LAM, CT D04 - Hayward DME / District Laboratory | 08/04/2025 | 08/04/2025 | No | Average uncompacted voids - 47.1% | |||
| 2024-12-18-53-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | WAI YIN LAM, CT D04 - Hayward DME / District Laboratory | 03/10/2025 | 08/04/2025 | No | Flat and elongated particles- 2.3% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-12-18-53-1 AASHTO T335-09r13
DIME Test ID: 2024-12-18-53-2 AASHTO T96-02r10
DIME Test ID: 2024-12-18-53-3 AASHTO T304-11
DIME Test ID: 2024-12-18-53-4 ASTM D4791-10