DIME » All Projects » Project - DEA: 11056404 » Sample 2025-06-27-50 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-06-27-50

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000683
DEA: 11056404
EFIS: 1124000359
DIST-CO-RTE-PM11-SD-11-0.6/2.7
Award Date12/20/2024
Closeout Date01/06/2026
Work DescriptionPERFORM GRADING, CONSTRUCT DRAINAGE FACILITIES, SIGNS AND STRIPING.
Location DescriptionSAN DIEGO COUNTY NEAR SAN DIEGO FROM 0.2 MILE WEST OF SANYO AVENUE UNDERCROSSING TO 0.2 MILE EAST OF SIEMPRE VIVA ROAD OVERCROSSING
QA Service Level1 (Verified on 01/17/2025)

Sample Information

Sample Taken Date06/27/2025 Sample Unique Key50
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/27/2025
Sample typeProduction Start-Up A brief description of the sampleRPSU
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of samplerTET Telephone number of sampler6199366795
Laboratory sample identification25-06-27-50-RPSU Linked DIME Sample ID2025-06-27-51
The fabricator/manufacturer/facility nameVulcan Otay Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number326122 Otay SJR
Binder content (%)7.8 Virgin binder PG PG 64-16
Design binder PG PG 64-16 Binder SupplierSJR
RAP content (%)Not set WMA AdditivesYes
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-06-27-50-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory07/28/202507/28/2025
Yes
07/29/2025Complies Target - 7.80%, Tested 7.62% Saved sample for T30Public - Test Data Visible
2025-06-27-50-2AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory07/28/202507/28/2025
Yes
07/29/2025Complies target - 2.418 Tested 2.419Public - Test Data Visible
2025-06-27-50-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory07/28/202507/28/2025
Yes
07/29/2025Complies Target Gmb within .008 from lowest to highest. Tested 2.288 to 2.296 Public - Test Data Visible
2025-06-27-50-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory07/28/202507/28/2025
Yes
07/29/2025Complies Target 4.0% +/- 1.5% Tested an AVG of 5.3% Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-06-27-50-1 AASHTO T308-10 (Verified)
DIME Test ID: 2025-06-27-50-2 AASHTO T209-22 (Verified)
DIME Test ID: 2025-06-27-50-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-06-27-50-4 AASHTO T269-14 (Verified)