Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-07-13-10

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1001312
DEA: 11432844
EFIS: 1125000219
DIST-CO-RTE-PM11---
Award DateNot set
Closeout DateNot set
Work DescriptionNot set
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date07/13/2025 Sample Unique Key10
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/14/2025
Sample typeProduction Start-Up A brief description of the samplePSU
The quantity of what the sample constitutes12 Boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of samplerTET Telephone number of sampler6199366795
Laboratory sample identification25-07-13-10-PSU Linked DIME Sample ID2025-07-13-12
The fabricator/manufacturer/facility nameVulcan Otay Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number22414 Otay SJR
Binder content (%)4.7 Virgin binder PG PG 64-28M
Design binder PG PG 64-28M Binder SupplierSan Joaquin Refinery
RAP content (%)15 WMA AdditivesNo
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-07-13-10-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory07/18/202507/18/2025
Yes
07/22/2025Complies Target 4.70%, Tested 5.11% Saved Material for T30Public - Test Data Visible
2025-07-13-10-2AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory07/18/202507/18/2025
Yes
07/22/2025Complies Target - 2.508 Tested 2.511Public - Test Data Visible
2025-07-13-10-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory07/18/202507/18/2025
Yes
07/22/2025Complies Target Gmb within 0.008 spec Tested Gmb within 0.004Public - Test Data Visible
2025-07-13-10-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory07/18/202507/18/2025
Yes
07/22/2025Complies Target 4.0% +/- 1.5% Tested an Avg of 3.9%Public - Test Data Visible
2025-07-13-10-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory07/29/202507/29/2025
Yes
07/30/2025Complies WET Target >70 psi tested 125 psi - DRY Target > 100 psi Tested 167 psiPublic - Test Data Visible
2025-07-13-10-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory07/24/202507/24/2025
Yes
07/24/2025Complies Target < 12.7 mm Tested an Avg of 3.18 mmPublic - Test Data Visible
2025-07-13-10-7AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory07/23/202507/24/2025
Yes
07/24/20253 RAP Burns, Save one sample for T30Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-07-13-10-1 AASHTO T308-10 (Verified)
DIME Test ID: 2025-07-13-10-2 AASHTO T209-22 (Verified)
DIME Test ID: 2025-07-13-10-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-07-13-10-4 AASHTO T269-14 (Verified)
DIME Test ID: 2025-07-13-10-5 AASHTO T283-14 (Verified)
DIME Test ID: 2025-07-13-10-6 CTM 389-19 (Verified)
DIME Test ID: 2025-07-13-10-7 AASHTO T308-10 (Verified)