Print Report | Back to Sample Detail

Sample Record for 2026-01-12-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215220 DEA: 07210624 EFIS: 0719000068 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA,SBD-71-1.8/R4.7&R0.0/R0.2
Work Description: PLACE STRUCTURE CONCRETE RETAINING WALLS & BOX CULVERT AND PLACE JPCP.
Location Description: IN LOS ANGELES AND SAN BERNARDINO COUNTIES IN POMONA AND CHINO HILLS FROM 0.2 MILE SOUTH OF MISSION BOULEVARD OVERCROSSING TO 0.2 MILE OF SAN BERNARDINO COUNTY LINE.
Contractor Name: OHL USA
Contractor Address: 1920 Main Street, Suite 310, Irvine, California 92614
Resident Engineer: Michael Wang Structure Rep.: Ryan Valentine

Sample Information

DIME Sample ID: 2026-01-12-13
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 01/12/2026
Date that the sample was received by the laboratory/organization performing the testing: 01/14/2026
The quantity of what the sample constitutes: 4 bags comb agg, 2 bags RAP
A brief description of the sample: PSUE 3/4" HMA-A-SP R15 No LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0100A-26
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SJR/ AAA-Corona Quarry

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-33-0005
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: belt cut at All American Asphalt Corona
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 105793
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 0

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2026-01-12-13-1CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-2CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-3AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-5AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-7AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-9AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2026-01-12-13-10ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)01/14/2026Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory