Sample Record for 2024-11-07-62
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 994331 DEA: 11430254 EFIS: 1118000079
QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-52-5.1/9.0
Work Description: CONST AUX LANE, COMPACTION GROUTING, RHMA, LANDSCAPE, & ELECTRICAL.
Location Description: SAN DIEGO COUNTY IN SAN DIEGO FROM 0.4 MILE WEST OF CONVOY STREET OVERCROSSING TO 0.3 MILE EAST OF SANTO ROAD OVERCROSSING
Contractor Name: CSI/CJA A JOINT VENTURE
Contractor Address: 9685 VIA EXCLENCIA STREET #200, SAN DIEGO, CA 92126
Resident Engineer: Tai Lam Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2024-11-07-62
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 688-1570
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 11/07/2024
Date that the sample was received by the laboratory/organization performing the testing: 12/11/2024
The quantity of what the sample constitutes: 3 bags
A brief description of the sample: 1x4 concrete aggregates
From where was the sample collected: Supplier
Laboratory sample identification: 0810-S
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Robertsons - El Cajon
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-37-0020
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Tests Assigned to this Sample
| DIME Test ID | Test Method | Assigned Date | Test Date | Assigned By | Assigned Lab | Test Comments | Assigned To |
| 2024-11-07-62-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 12/17/2024 | 12/19/2024 | Melchor Oronoz | CT D11 - District 11 Materials Laboratory | 1" | Mohammad Abbassi |
| 2024-11-07-62-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 12/17/2024 | 12/19/2024 | Melchor Oronoz | CT D11 - District 11 Materials Laboratory | 3/8" | Mohammad Abbassi |
| 2024-11-07-62-3 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 12/17/2024 | 12/19/2024 | Melchor Oronoz | CT D11 - District 11 Materials Laboratory | Sand
| Mohammad Abbassi |
| 2024-11-07-62-4 | CTM 217-June 2011: Method of Test for Sand Equivalent | 12/17/2024 | 12/19/2024 | Melchor Oronoz | CT D11 - District 11 Materials Laboratory | | Mohammad Abbassi |
| 2024-11-07-62-5 | CTM 229-June 2011: Method of Test for Durability Index | 12/17/2024 | 12/19/2024 | Melchor Oronoz | CT D11 - District 11 Materials Laboratory | 1" | Mohammad Abbassi |
| 2024-11-07-62-6 | CTM 229-June 2011: Method of Test for Durability Index | 12/17/2024 | 12/19/2024 | Melchor Oronoz | CT D11 - District 11 Materials Laboratory | 3/8" | Mohammad Abbassi |
123284123285123286123287123288123289
