Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-05-22-5

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1001671
DEA: 11430274
EFIS: 1118000084
DIST-CO-RTE-PM11-SD-76-R17.5/52.2
Award DateNot set
Closeout DateNot set
Work DescriptionCULVERT RESTORATION, INSTALL CURB RAMPS, GUARDRAIL, & HMA-A.
Location DescriptionSAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE EAST OF ROUTE 15 TO 0.1 MILE WEST OF ROUTE 79
QA Service Level1 (Verified on 10/01/2025)

Sample Information

Sample Taken Date05/22/2026 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/22/2026
Sample typeVerification A brief description of the sampleJMF
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMartin Marietta Lakeside Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number23417105T3
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Combined Gradation Report Information

Combined Gradation Report IdBin IndexDime Test Id
2026-07-8: HMA Aggregates (Size 3/4"): Sieve Analysis With RAP12026-05-22-5-15

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-05-22-5-12CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory06/09/202606/09/2026
Yes
06/30/2026Complies Target < 12.7 mm Tested an Avg of 2.75 mmPublic - Test Data Visible
2026-05-22-5-14AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory07/21/202607/21/2026
Yes
07/22/2026Retest - Use Oven #1, compliesPublic - Test Data Visible
2026-05-22-5-15AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Shawn Rivers, CT D11 - District 11 Materials Laboratory07/21/202607/21/2026
Yes
07/22/2026RAP N/APublic - Test Data Visible
2026-05-22-5-16AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Melchor Oronoz, CT D11 - District 11 Materials Laboratory08/14/202608/14/2026
Yes
08/14/2026Retest, complies, tested 4.57%, target 4.45%.Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-05-22-5-7 AASHTO T209-12 (Verified)
DIME Test ID: 2026-05-22-5-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-05-22-5-4 AASHTO T269-14 (Verified)
DIME Test ID: 2026-05-22-5-1 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-22-5-6 AASHTO T283-14 (Verified)
DIME Test ID: 2026-05-22-5-5 CTM 389-19 (Verified)
DIME Test ID: 2026-05-22-5-8 AASHTO T308-25 (Verified)
DIME Test ID: 2026-05-22-5-12 CTM 389-19 (Verified)
DIME Test ID: 2026-05-22-5-9 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-22-5-10 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-22-5-11 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-22-5-15 AASHTO T30-19 (Verified)
DIME Test ID: 2026-05-22-5-14 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-22-5-16 AASHTO T308-10 (Verified)