Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2026-03-12-31
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 995065 DEA: 112N1764 |
|---|---|
| DIST-CO-RTE-PM | 11-IMP-8-R50.3/R96.7 |
| Award Date | 05/01/2025 |
| Closeout Date | Not set |
| Work Description | MICROSURFACING, SHOULDER BACKING, PAVEMENT MARKING, & INSTALL SIGNS. |
| Location Description | IMPERIAL COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE WEST OF BONDS CORNER OVERCROSSING TO 0.2 MILE EAST OF FOURTH AVENUE OVERCROSSING . |
| QA Service Level | 1 (Verified on 06/11/2024) |
Sample Information
| Sample Taken Date | 03/12/2026 | Sample Unique Key | 31 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/13/2026 |
| Sample type | Verification | A brief description of the sample | JMFR |
| The quantity of what the sample constitutes | 5 bags | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Gerardo | Last name of sampler or witnessed by | Cordero |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | API Gateway | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | See Mix |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 40 API Val |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2026-03-19: HMA Aggregates (Size 3/4"): RHMA-G - Batch Plant - Sieve Analysis Without RAP | 1 | 2026-03-12-31-4 |
| 2026-03-19: HMA Aggregates (Size 3/4"): RHMA-G - Batch Plant - Sieve Analysis Without RAP | 2 | 2026-03-12-31-5 |
| 2026-03-19: HMA Aggregates (Size 3/4"): RHMA-G - Batch Plant - Sieve Analysis Without RAP | 3 | 2026-03-12-31-6 |
| 2026-03-19: HMA Aggregates (Size 3/4"): RHMA-G - Batch Plant - Sieve Analysis Without RAP | 4 | 2026-03-12-31-13 |
| 2026-03-19: HMA Aggregates (Size 3/4"): RHMA-G - Batch Plant - Sieve Analysis Without RAP | 5 | 2026-03-12-31-7 |
| 2026-03-19: HMA Aggregates (Size 3/4"): RHMA-G - Batch Plant - Sieve Analysis Without RAP | 6 | 2026-03-12-31-18 |
Submitted Tests
Go to page:
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-03-12-31-4 AASHTO T27-14 (Verified)
DIME Test ID: 2026-03-12-31-5 AASHTO T27-14 (Verified)
DIME Test ID: 2026-03-12-31-6 AASHTO T27-14 (Verified)
DIME Test ID: 2026-03-12-31-13 AASHTO T27-14 (Verified)
DIME Test ID: 2026-03-12-31-7 AASHTO T27-14 (Verified)
DIME Test ID: 2026-03-12-31-18 AASHTO T27-14 (Verified)
DIME Test ID: 2026-03-12-31-2 ASTM D4791-10 (Verified)
DIME Test ID: 2026-03-12-31-9 AASHTO T85-13 (Verified)
DIME Test ID: 2026-03-12-31-8 AASHTO T84-14 (Verified)
DIME Test ID: 2026-03-12-31-11 AASHTO T96-02r10 (Verified)
DIME Test ID: 2026-03-12-31-3 AASHTO T176-08 (Verified)
DIME Test ID: 2026-03-12-31-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2026-03-12-31-10 AASHTO T304-11 (Verified)
DIME Test ID: 2026-03-12-31-19 AASHTO T30-19 (Verified)
DIME Test ID: 2026-03-12-31-20 AASHTO T30-19 (Verified)