Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Displaying 101-120 of 415 results.
| Test Org | Prefix | Number | Version | Name | Part | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|
| AASHTO | R | 28 | 16 | Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel | PAV | Asphalt Binder | View |
| AASHTO | M | 247 | 22 | Glass Beads Used in Pavement Markings | Gradation | Glass Beads | View |
| AASHTO | M | 247 | 22 | Glass Beads Used in Pavement Markings | Moisture | Glass Beads | View |
| AASHTO | M | 247 | 22 | Glass Beads Used in Pavement Markings | Roundness | Glass Beads | View |
| ASTM | F | 606 | 14a | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Proof Load with Wedge | SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 14a | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Proof Load | SMTL TM3 - Nut SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 21 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Proof Load with Wedge | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 21 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Proof Load | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 21 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Tensile, Yield and Elongation | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 14a | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Tensile, Yield and Elongation | SMTL TM3 - Bolt SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 21 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Hex Cap Screws | SMTL TM3 - Fastener Assembly | View |
| ASTM | F | 606 | 14 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | Hex Cap Screws | SMTL TM3 - Bolt SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASTM | E | 23 | 12c | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | Charpy Impact | SMTL TM6 - Steel Check Sample Plate | View |
| ASTM | E | 18 | 15 | Standard Test Methods for Rockwell Hardness of Metallic Materials | Hardness | SMTL TM6 - Prestressing Strand Wedges SMTL TM6 - Steel Check Sample Plate SMTL TM3 - Bolt SMTL TM3 - Nut SMTL TM3 - Washer SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASTM | E | 340 | 15 | Standard Practice for Macroetching Metals and Alloys | SMTL TM5 - Welded Hoops | View | |
| ASTM | E | 23 | 18 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | Charpy Impact | SMTL TM6 - Steel Check Sample Plate | View |
| ASTM | E | 18 | 20 | Standard Test Methods for Rockwell Hardness of Metallic Materials | Hardness | SMTL TM6 - Steel Check Sample Plate SMTL TM3 - Fastener Assembly | View |
| ASTM | E | 415 | 21 | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry | SMTL TM6 - Steel Check Sample Plate | View | |
| ASTM | E | 313 | 20 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates | Paint Thermoplastic | View | |
| ASTM | E | 70 | 15 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode | Paint | View |