Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Displaying 421-431 of 431 results.
| Test Org | Prefix | Number | Version | Name | Part | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|
| ASTM | D | 6490 | 99r2022 | ASTM E96/E96M & ASTM D6490 Combined Water Vapor Transmission Test (Wet Cup Method for Cementitious Panels) | Water Vapor | Concrete Masonry Unit Reactive Penetrating Sealers | View |
| AASHTO | R | 28 | 22 | Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel | PAV | Asphalt Binder | View |
| AASHTO | R | 28 | 16 | Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel | PAV | Asphalt Binder | View |
| CTM | 211 | May 2010 | Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Aggregate Job Mix Formula Partial High Friction Surface Treatment | View | ||
| ASME | B | 1.2 | 83r17 | (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Ring Gage | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r01 | (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Ring Gage | SMTL TM3 - Bolt SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r17 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r01 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | SMTL TM3 - Nut SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r17 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r01 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | SMTL TM3 - Bolt SMTL TM3 - Nut SMTL TM3 - Rod SMTL TM3 - Rocap Assembly SMTL TM3 - Fastener Assembly | View |
| SMTL | BILST | 06 | (Neoprene Verification) Bilstein Test | SMTL TM1 - Elastomeric Bearing Pad SMTL TM2 - Type B Elastomeric Joint Seal | View |