Search Test Methods

Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.

Please enter search terms to find matching test methods implemented in DIME. Terms such as "ASTM C39", "C39", "compressive strength" are acceptable. You can use the advanced search function if you wish to perform a refined search.

Displaying 301-320 of 449 results.
Test OrgPrefixNumberVersionNamePartMaterial TypeSample Card
AASHTOT31622Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer Asphalt Binder
Cold Central Plant Recycling
Full Depth Recycling
Partial Depth Recycling
View
AASHTOT4822Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup Asphalt Binder
Asphaltic Emulsion
Cold Central Plant Recycling
View
AASHTOT5922Standard Method of Test for Emulsified AsphaltsParticle Charge Cationic Emulsified (Sec. 8)Asphaltic Emulsion
View
AASHTOT5922Standard Method of Test for Emulsified AsphaltsDemulsibility (Sec. 10)Asphaltic Emulsion
View
AASHTOT5122Standard Method of Test for Ductility of Asphalt MaterialsAsphaltic EmulsionAsphaltic Emulsion
Cold Central Plant Recycling
Full Depth Recycling
Partial Depth Recycling
View
AASHTOT5922Standard Method of Test for Emulsified AsphaltsCement Mixing (Sec. 12)Asphaltic Emulsion
View
AASHTOT5922Standard Method of Test for Emulsified AsphaltsStorage Stability of Emulsified (Sec. 18)Asphaltic Emulsion
View
ASTMD440223Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer Asphalt Binder
Bituminous Adhesive
View
ASTMC10923Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) Cementitious
View
AASHTOTP13223Determining the Dynamic Modulus for Asphalt Mixtures Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Hot Mix Asphalt
View
AASHTOT24023Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) Asphalt Binder
Asphaltic Emulsion
Cold Central Plant Recycling
View
AASHTOT4423Standard Method of Test for Solubility of Bituminous Materials Asphaltic Emulsion
Asphalt Binder
Cold Central Plant Recycling
View
ASTMD804423Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures Hot Mix Asphalt
View
ASTMD354923Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens Partial Depth Recycling
Full Depth Recycling
Cold Central Plant Recycling
View
ASTMC11423-24Blended Cement Chemical Analysis: ASTM C114 (sections 7,16,17,18) & ASTM C595 Cementitious
View
ASTMC11423-24Slag Cement Chemical Analysis: ASTM C114 (17.2) & ASTM C989 Cementitious
View
ASTMC11423-24Portland Cement Chemical Analysis: ASTM C114 (sections 7,16,17,18,) & ASTM C150 Cementitious
View
ASTMC31124Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in ConcreteSections 11-17Cementitious
View
AASHTOT31524Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)Dynamic ShearAsphalt Binder
Cold Central Plant Recycling
View
AASHTOT26924E25Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt MixturesAir VoidJob Mix Formula Partial
Hot Mix Asphalt
Partial Depth Recycling
View