Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Displaying 281-300 of 449 results.
| Test Org | Prefix | Number | Version | Name | Part | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|
| ASTM | D | 4070 | 15r2022 | Standard Specification for Adhesive Lubricant | Section 9.1 Solids Content Test | Lubricant Adhesive | View |
| ASTM | D | 4070 | 15r2022 | Standard Specification for Adhesive Lubricant | Section 9.2 Viscosity and Shear Ratio Tests | Lubricant Adhesive | View |
| ASTM | D | 4070 | 15r2022 | Standard Specification for Adhesive Lubricant | Section 9.6 Peel Strength Test | Lubricant Adhesive | View |
| ASTM | D | 2265 | 2022 | Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range | Dropping point | Corrosion-inhibiting grease | View |
| ASTM | D | 93 | 16 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | Flash Point | Paint | View |
| ASTM | D | 711 | 15 | Method of Test for Daylight 45 Degree, 0 Degree Luminus Directional Reflectance of Paint Finishes (Withdrawn 1954) | Dry Time | Paint | View |
| ASTM | D | 6490 | 99r2022 | ASTM E96/E96M & ASTM D6490 Combined Water Vapor Transmission Test (Wet Cup Method for Cementitious Panels) | Water Vapor | Concrete Masonry Unit Reactive Penetrating Sealers | View |
| ASTM | D | 6184 | 2022 | Oil Separation from Lubricating Grease (Conical Sieve Method) | conical sieve | Corrosion-inhibiting Grease | View |
| ASTM | D | 5329 | 20 | Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements | Section 10 - Resilience | Crack Treatment Material | View |
| ASTM | D | 7585 | 15 | Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments | Paint | View | |
| ASTM | D | 5329 | 20 | Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements | Section 6 - Cone Penetration | Crack Treatment Material | View |
| ASTM | D | 5329 | 20 | Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements | Section 14 - Tensile Adhesion | Crack Treatment Material | View |
| ASTM | D | 2486 | 17 | Standard Test Methods for Scrub Resistance of Wall Paints | Paint | View | |
| ASTM | D | 70 | 19 | Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method) | Pycnometer Method | Crack Treatment Material | View |
| ASTM | D | 3335 | 14 | Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy | Lead content | Paint Thermoplastic | View |
| ASTM | D | 6628 | 16 | Standard Specification for Color of Pavement Marking Materials | Chromaticity | Paint | View |
| ASTM | D | 3111 | 19r2025 | Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test | Crack Treatment Material | View | |
| ASTM | D | 3723 | 11 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing | Pigment Content | Paint Curing Compound | View |
| ASTM | D | 8044 | 23 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures | Hot Mix Asphalt | View | |
| ASTM | D | 3549 | 23 | Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens | Partial Depth Recycling Full Depth Recycling Cold Central Plant Recycling | View |