Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Displaying 281-300 of 431 results.
| Test Org | Prefix | Number | Version | Name | Part | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|
| ASTM | D | 4070 | 15r2022 | Standard Specification for Adhesive Lubricant | Section 9.2 Viscosity and Shear Ratio Tests | Lubricant Adhesive | View |
| ASTM | D | 4070 | 15r2022 | Standard Specification for Adhesive Lubricant | Section 9.6 Peel Strength Test | Lubricant Adhesive | View |
| ASTM | D | 2265 | 2022 | Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range | Dropping point | Corrosion-inhibiting grease | View |
| ASTM | D | 93 | 16 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | Flash Point | Paint | View |
| ASTM | D | 711 | 15 | Method of Test for Daylight 45 Degree, 0 Degree Luminus Directional Reflectance of Paint Finishes (Withdrawn 1954) | Dry Time | Paint | View |
| ASTM | C | 469 | 14 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression | Static Modulus of Elasticity | Concrete Concrete Core | View |
| ASTM | D | 6490 | 99r2022 | ASTM E96/E96M & ASTM D6490 Combined Water Vapor Transmission Test (Wet Cup Method for Cementitious Panels) | Water Vapor | Concrete Masonry Unit Reactive Penetrating Sealers | View |
| ASTM | C | 97 | 2025 | Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone (expanded for water repellency test) | Water Repellency | Concrete Masonry Unit Reactive Penetrating Sealers | View |
| ASTM | C | 1240 | 2020 | Standard Specification for Silica Fume Used in Cementitious Mixtures | Silica Fume | Cementitious | View |
| ASTM | D | 6184 | 2022 | Oil Separation from Lubricating Grease (Conical Sieve Method) | conical sieve | Corrosion-inhibiting Grease | View |
| ASTM | C | 496 | 17 | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens | Split Tensile Strength | Concrete | View |
| ASTM | D | 7585 | 15 | Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments | Paint | View | |
| ASTM | D | 2486 | 17 | Standard Test Methods for Scrub Resistance of Wall Paints | Paint | View | |
| ASTM | D | 3335 | 14 | Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy | Lead content | Paint Thermoplastic | View |
| ASTM | D | 6628 | 16 | Standard Specification for Color of Pavement Marking Materials | Chromaticity | Paint | View |
| ASTM | D | 3723 | 11 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing | Pigment Content | Paint Curing Compound | View |
| ASTM | A | 615 | 15 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | Galvanize | SMTL TM5 - Threaded Bar | View |
| ASTM | A | 772 | 15 | Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current | Galvanize | SMTL TM5 - Threaded Bar | View |
| ASTM | D | 522 | 17 | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings | Method B | Paint | View |
| ASTM | D | 869 | 15 | Standard Test Method for Evaluating Degree of Settling of Paint | Paint | View |