Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Displaying 201-220 of 405 results.
| Test Org | Prefix | Number | Version | Name | Part | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|
| ASTM | A | 416 | 18 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | SMTL TM4 - Prestressing Strand | View | |
| ASTM | A | 416 | 18 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | Strand Diameter Check | SMTL TM4 - Prestressing Strand | View |
| ASTM | E | 23 | 18 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | Charpy Impact | SMTL TM6 - Steel Check Sample Plate | View |
| ASTM | A | 1064 | 18 | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete | Weld Shear | SMTL TM8 - Welded Wire Mesh | View |
| AASHTO | T | 59 | 18 | Standard Method of Test for Emulsified Asphalts | Sieve Test (Sec. 13) | Asphaltic Emulsion | View |
| AASHTO | T | 53 | 18 | Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus) | Asphalt Binder Asphaltic Emulsion | View | |
| AASHTO | T | 44 | 18 | Standard Method of Test for Solubility of Bituminous Materials | Asphaltic Emulsion Asphalt Binder | View | |
| AASHTO | T | 48 | 18 | Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup | Asphalt Binder Asphaltic Emulsion | View | |
| ASTM | D | 3549 | 18 | Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens | Hot Mix Asphalt | View | |
| AASHTO | T | 350 | 19 | Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Multiple Stress Creep Recovery | Asphalt Binder | View |
| ASTM | C | 25 | 19 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime | Cementitious | View | |
| ASTM | C | 566 | 19 | Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying | Aggregate | View | |
| ASTM | C | 136 | 19 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates | Aggregate | View | |
| ASTM | A | 775 | 19 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | Holiday | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar | View |
| ASTM | A | 775 | 19 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | Epoxy Coating | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM5 - Threaded Bar SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar SMTL TM8 - Welded Wire Mesh SMTL TM5 - Headed Bars | View |
| ASTM | A | 934 | 19 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | Epoxy-Coating | SMTL TM4 - Prestressing Strand SMTL TM5 - Threaded Bar SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar SMTL TM8 - Welded Wire Mesh SMTL TM5 - Couplers SMTL TM5 - Headed Bars SMTL TM5 - Welded Hoops | View |
| ASTM | A | 934 | 19 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | Holiday Bend | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops SMTL TM7 - Epoxy Coated Dowels SMTL TM7 - Epoxy Coated Rebar | View |
| ASTM | D | 8225 | 19 | Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature | Hot Mix Asphalt | View | |
| ASTM | C | 494 | 19 | Standard Specification for Chemical Admixtures for Concrete | 18.2 Liquid admixtures | Concrete Admixture | View |
| ASTM | C | 494 | 19 | Standard Specification for Chemical Admixtures for Concrete | 18.3 Non liquid admixtures | Concrete Admixture | View |