Print Report | Back to Test Summary

Testing Report for 2021-05-20-21-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 101J1704
EFIS: 1018000179
Project ID: 215325
QA Service Level: 1
DIST-CO-RTE-PM: 10-AMA-88-32.3/38.0
Work Description: HMA, TRAFFIC STRIPING, COLD PLANE AC AND RUMBLE STRIP.
Location Description: AMADOR COUNTY AT AND NEAR BARTON FROM 0.4 MILE WEST OF SILVER DRIVE TO 0.2 MILE WEST OF SHAKE RIDGE ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Iqbal Aulakh
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-05-20-21
TL Number from the TL Form: c034721
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 5/20/2021
Date that the sample was received by the laboratory/organization performing the testing: 6/4/2021
The quantity of what the sample constitutes: 1 of 1 can
A brief description of the sample: PG64-28M
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: George Reed - Clements Plant

Material Information

Performance Grade: PG 64-28 M
Modified: Yes
Lot number: 1
Sublot number: 1
Tank number:
Time of sample:
HMA Supplier: George Reed - Clements
Asphalt Binder Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-05-20-21-4
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 6/7/2021
Verified Date: 6/11/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: G*/Sin (delta) at 2.2 kPa is 60.9 degree estimated, < 80 max per spec.
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: RTFO residue
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.432 kPa
Phase Angle (δ) (for the 10 cycles): 59.9 degree
Complex Modulus (G*) (for the 10 measurements): 4.317 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 4.99 kPa