Print Report | Back to Sample Detail

Sample Record for 2022-10-28-64

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993333 DEA: 04264724 EFIS: 0419000068 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-101-R20.8/27.1
Work Description: CIP BRIDGES, CONSTRUCT ROADWAY, RETAINING WALLS AND MODIFY ELECTRICAL.
Location Description: MARIN COUNTY IN AND NEAR NOVATO FROM 0.1 MILE SOUTH OF FRANKLIN AVENUE OVERHEAD TO 0.5 MILE SOUTH OF SAN ANTONIO CREEK BRIDGE
Contractor Name: GHILOTTI CONSTRUCTION CO. INC. (RILEY GENAZZI & JOSH SERAFINO)
Contractor Address: 246 GHILOTTI AVE., SANTA ROSA, CA 95407
Resident Engineer: Fabio La Serna Structure Rep.: Jeremy Light

Sample Information

DIME Sample ID: 2022-10-28-64
TL Number from the TL Form: 101267
Sample Submitted By Organization: CT D04 - Petaluma Field Laboratory
Sample Organization Contact: (510) 385-6841
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 10/28/2022
Date that the sample was received by the laboratory/organization performing the testing: 11/09/2022
The quantity of what the sample constitutes: 1 box
A brief description of the sample: Hot mix asphalt
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Richmond

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number: DO4 JMF 22 016
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2022-10-28-64-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 1009 Clegg Court, Suite A,5675 Gibraltar Dr., Pleasanton, CA
Organization City: Petaluma
Organization State: CA
Organization Zipcode: 94954
Organization Email: glenn.cea@dot.ca.gov
Organization Phone: (510) 385-6841
This test has been superseded on 01/31/2023. The corrected test ID is: 2022-10-28-64-2
Reason: retested

Test 2 of 2

DIME Test ID: 2022-10-28-64-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/22/2023
Date Tested: 11/29/2022
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 5675 Gibraltar Dr.,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: glenn.cea@dot.ca.gov
Organization Phone: (510) 385-6841
General Comments for this Test: Tolerance = 4.9% to 5.7%
The test was superseded from test ID: 2022-10-28-64-1
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3085.0 g
Mass of the specimen and specimen basket assembly prior to ignition 5112.5 g
Mass of HMA Sample prior to ignition 2027.5 g
Corrected Asphalt Binder Content 4.81 %
Mass Loss 121.8 g
Mass of aggregate remaining after ignition 1905.7 g
Correction Factor (Percent by mass of HMA Specimen) 1.05 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.15 %
Test Temperature 900 F