Print Report | Back to Sample Detail

Sample Record for 2022-03-02-61

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-03-02-61
TL Number from the TL Form:
Sample Submitted By Organization: Dutra Materials
Sample Organization Contact: (415) 847-8087
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/02/2022
Date that the sample was received by the laboratory/organization performing the testing: 03/02/2022
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: HMA type A w 15%RAP
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Materials Richmond

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2022-03-02-61-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.352
Bulk Specific Gravity 2 2.35
Bulk Specific Gravity 3 2.353
Average Bulk Specific Gravity 2.352

Test 2 of 5

DIME Test ID: 2022-03-02-61-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Water
Specific Gravity for Sample 1 2.45
Theoretical maximum density at 25°C (77°F) no data

Test 3 of 5

DIME Test ID: 2022-03-02-61-3
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4 %
Percent Air Voids 2 4.1 %
Percent Air Voids 3 4 %
Average Percent Air Voids 4 %

Test 4 of 5

DIME Test ID: 2022-03-02-61-4
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? SI Units
Average Dry Tensile Strength 149 psi
Average Wet Tensile Strength 120.1 psi
Tensile Strength Ratio 81

Test 5 of 5

DIME Test ID: 2022-03-02-61-5
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A) 15000
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B) 15000
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A) no data0 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B) no data0 mm
Stripping Inflection Point (Wheel A) >10000
Stripping Inflection Point (Wheel B) >10000