Sample Record for 2018-12-21-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
DEA: No Project
QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2018-12-21-1
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Verification
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 12/21/2018
Date that the sample was received by the laboratory/organization performing the testing: 12/26/2018
The quantity of what the sample constitutes: 3 and 5 ea
A brief description of the sample: 2", 2 1/4', 2 1/2" A563-DH HDG and plain nuts
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: UIS
Material Information
Rocap Number(s): n/a
Heat Number(s): 188527, 177682, 188194, 188739, 188360, 156042, 188360, 188451
Nut Mfg. Lot Number(s): Dyson- DDZP, DDYC, DDYO, DEAC, DDZA, DDTN, DDZD, DDZR
Washer Mfg. Lot Number(s): n/a
Bolt Specification: n/a
Bolt Length(s): n/a
Nut Specification: A563-DH
Washer Specification: n/a
Finish: HDG and plain
Diameter/Size: 2", 2 1/4", 2 1/2"
Bolt Mfg. Lot Number: n/a
Rocap Test Requirement(s): none
Lubricant Requirements(s): yes
Test Results
Test 1 of 79
DIME Test ID: 2018-12-21-1-1
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 2 of 79
DIME Test ID: 2018-12-21-1-2
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 3 of 79
DIME Test ID: 2018-12-21-1-3
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 4 of 79
DIME Test ID: 2018-12-21-1-4
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 5 of 79
DIME Test ID: 2018-12-21-1-5
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 6 of 79
DIME Test ID: 2018-12-21-1-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177682
|
|
Mfg. Lot Number
|
DDYC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 7 of 79
DIME Test ID: 2018-12-21-1-7
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177682
|
|
Mfg. Lot Number
|
DDYC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 8 of 79
DIME Test ID: 2018-12-21-1-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177682
|
|
Mfg. Lot Number
|
DDYC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 9 of 79
DIME Test ID: 2018-12-21-1-9
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 10 of 79
DIME Test ID: 2018-12-21-1-10
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 11 of 79
DIME Test ID: 2018-12-21-1-11
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 12 of 79
DIME Test ID: 2018-12-21-1-12
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 13 of 79
DIME Test ID: 2018-12-21-1-13
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
Test 14 of 79
DIME Test ID: 2018-12-21-1-14
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 15 of 79
DIME Test ID: 2018-12-21-1-15
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 16 of 79
DIME Test ID: 2018-12-21-1-16
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 17 of 79
DIME Test ID: 2018-12-21-1-17
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 18 of 79
DIME Test ID: 2018-12-21-1-18
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 19 of 79
DIME Test ID: 2018-12-21-1-19
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 20 of 79
DIME Test ID: 2018-12-21-1-20
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 21 of 79
DIME Test ID: 2018-12-21-1-21
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 22 of 79
DIME Test ID: 2018-12-21-1-22
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 23 of 79
DIME Test ID: 2018-12-21-1-23
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 24 of 79
DIME Test ID: 2018-12-21-1-24
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 25 of 79
DIME Test ID: 2018-12-21-1-25
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 26 of 79
DIME Test ID: 2018-12-21-1-26
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 27 of 79
DIME Test ID: 2018-12-21-1-27
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 28 of 79
DIME Test ID: 2018-12-21-1-28
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 29 of 79
DIME Test ID: 2018-12-21-1-29
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 30 of 79
DIME Test ID: 2018-12-21-1-30
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 31 of 79
DIME Test ID: 2018-12-21-1-31
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 32 of 79
DIME Test ID: 2018-12-21-1-32
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 33 of 79
DIME Test ID: 2018-12-21-1-33
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 34 of 79
DIME Test ID: 2018-12-21-1-34
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 35 of 79
DIME Test ID: 2018-12-21-1-35
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 36 of 79
DIME Test ID: 2018-12-21-1-36
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 37 of 79
DIME Test ID: 2018-12-21-1-37
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 38 of 79
DIME Test ID: 2018-12-21-1-38
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Gage Type
|
Pass
|
Test 39 of 79
DIME Test ID: 2018-12-21-1-39
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
5.54 mils
|
Test 40 of 79
DIME Test ID: 2018-12-21-1-40
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.38 mils
|
Test 41 of 79
DIME Test ID: 2018-12-21-1-41
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.27 mils
|
Test 42 of 79
DIME Test ID: 2018-12-21-1-42
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.44 mils
|
Test 43 of 79
DIME Test ID: 2018-12-21-1-43
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.99 mils
|
Test 44 of 79
DIME Test ID: 2018-12-21-1-44
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.39 mils
|
Test 45 of 79
DIME Test ID: 2018-12-21-1-45
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.84 mils
|
Test 46 of 79
DIME Test ID: 2018-12-21-1-46
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.48 mils
|
Test 47 of 79
DIME Test ID: 2018-12-21-1-47
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.36 mils
|
Test 48 of 79
DIME Test ID: 2018-12-21-1-48
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
8.07 mils
|
Test 49 of 79
DIME Test ID: 2018-12-21-1-49
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.59 mils
|
Test 50 of 79
DIME Test ID: 2018-12-21-1-50
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.94 mils
|
Test 51 of 79
DIME Test ID: 2018-12-21-1-51
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.77 mils
|
Test 52 of 79
DIME Test ID: 2018-12-21-1-52
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.72 mils
|
Test 53 of 79
DIME Test ID: 2018-12-21-1-53
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.65 mils
|
Test 54 of 79
DIME Test ID: 2018-12-21-1-54
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.73 mils
|
Test 55 of 79
DIME Test ID: 2018-12-21-1-55
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.76 mils
|
Test 56 of 79
DIME Test ID: 2018-12-21-1-56
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.43 mils
|
Test 57 of 79
DIME Test ID: 2018-12-21-1-57
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.98
|
|
Spacing
|
Ok
|
Test 58 of 79
DIME Test ID: 2018-12-21-1-58
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.65
|
|
Spacing
|
Ok
|
Test 59 of 79
DIME Test ID: 2018-12-21-1-59
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188527
|
|
Mfg. Lot Number
|
DDZP
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.13
|
|
Spacing
|
Ok
|
Test 60 of 79
DIME Test ID: 2018-12-21-1-60
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177682
|
|
Mfg. Lot Number
|
DDYC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.32
|
|
Spacing
|
Ok
|
Test 61 of 79
DIME Test ID: 2018-12-21-1-61
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177682
|
|
Mfg. Lot Number
|
DDYC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.25
|
|
Spacing
|
Ok
|
Test 62 of 79
DIME Test ID: 2018-12-21-1-62
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.57
|
|
Spacing
|
Ok
|
Test 63 of 79
DIME Test ID: 2018-12-21-1-63
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.77
|
|
Spacing
|
Ok
|
Test 64 of 79
DIME Test ID: 2018-12-21-1-64
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188194
|
|
Mfg. Lot Number
|
DDYO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.5
|
|
Spacing
|
Ok
|
Test 65 of 79
DIME Test ID: 2018-12-21-1-65
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.1
|
|
Spacing
|
Ok
|
Test 66 of 79
DIME Test ID: 2018-12-21-1-66
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.4
|
|
Spacing
|
Ok
|
Test 67 of 79
DIME Test ID: 2018-12-21-1-67
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188739
|
|
Mfg. Lot Number
|
DEAC
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.92
|
|
Spacing
|
Ok
|
Test 68 of 79
DIME Test ID: 2018-12-21-1-68
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.5
|
|
Spacing
|
Ok
|
Test 69 of 79
DIME Test ID: 2018-12-21-1-69
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.98
|
|
Spacing
|
Ok
|
Test 70 of 79
DIME Test ID: 2018-12-21-1-70
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZA
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.77
|
|
Spacing
|
Ok
|
Test 71 of 79
DIME Test ID: 2018-12-21-1-71
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.25
|
|
Spacing
|
Ok
|
Test 72 of 79
DIME Test ID: 2018-12-21-1-72
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.58
|
|
Spacing
|
Ok
|
Test 73 of 79
DIME Test ID: 2018-12-21-1-73
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
156042
|
|
Mfg. Lot Number
|
DDTN
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TDC DH 2H
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.93
|
|
Spacing
|
Ok
|
Test 74 of 79
DIME Test ID: 2018-12-21-1-74
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
29.25
|
|
Spacing
|
Ok
|
Test 75 of 79
DIME Test ID: 2018-12-21-1-75
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.47
|
|
Spacing
|
Ok
|
Test 76 of 79
DIME Test ID: 2018-12-21-1-76
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188360
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
29.32
|
|
Spacing
|
Ok
|
Test 77 of 79
DIME Test ID: 2018-12-21-1-77
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.93
|
|
Spacing
|
Ok
|
Test 78 of 79
DIME Test ID: 2018-12-21-1-78
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
29.28
|
|
Spacing
|
Ok
|
Test 79 of 79
DIME Test ID: 2018-12-21-1-79
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/08/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
188451
|
|
Mfg. Lot Number
|
DDZR
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
D/N 2H DH
|
|
Size
|
2.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.9
|
|
Spacing
|
Ok
|
