Sample Record for 2019-04-01-31
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212753 DEA: 020H7604 EFIS: 0215000086
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS,PLU-VAR-VAR
Work Description: FULL DEPTH RECLAMATION AND DRAINAGE REHABILITATION
Location Description: LASSEN AND PLUMAS COUNTIES AT AND NEAR CHILCOOT FROM 0.9 MILE WEST OF SUMMIT SCHOOL DRIVE TO 0.7 MILE EAST OF ROUTE 395
Contractor Name: HAT CREEK CONSTRUCTION & MATERIALS, INC.
Contractor Address: 24339 HWT 89, BURNEY, CA 96013
Resident Engineer: Ron Collins Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2019-04-01-31
TL Number from the TL Form:
Sample Submitted By Organization: CGI Technical Services, Incorporated
Sample Organization Contact: (530) 244-6277
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/01/2019
Date that the sample was received by the laboratory/organization performing the testing: 04/01/2019
The quantity of what the sample constitutes: Mix Design
A brief description of the sample: HMA Lab Batch - Mix Design
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek - Ward Lake
Material Information
HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test Results
Test
DIME Test ID: 2019-04-01-31-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 05/08/2019
Date Tested: 05/01/2019
Submitted By Organization: CGI Technical Services, Incorporated
Organization Address: 1612 Insight Place,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96003
Organization Email: vkyatham@currygroup.com
Organization Phone: (530) 244-6277
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Percent Air Voids
|
4.1 %
|
|
Percent Air Voids 2
|
3.9 %
|
|
Percent Air Voids 3
|
4.1 %
|
|
Average Percent Air Voids
|
4 %
|
Test
DIME Test ID: 2019-04-01-31-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Submitted By Organization: CGI Technical Services, Incorporated
Organization Address: 1612 Insight Place,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96003
Organization Email: vkyatham@currygroup.com
Organization Phone: (530) 244-6277
This test has been superseded on 05/08/2019.
Reason: retested
Test
DIME Test ID: 2019-04-01-31-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/08/2019
Date Tested: 05/01/2019
Submitted By Organization: CGI Technical Services, Incorporated
Organization Address: 1612 Insight Place,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96003
Organization Email: vkyatham@currygroup.com
Organization Phone: (530) 244-6277
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
no data
|
|
Corrected Asphalt Binder Content
|
5.4 %
|
|
Mass Loss
|
no data
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
|
Moisture Content
|
no data
|
|
Temperature Compensation Factor
|
no data
|
|
Test Temperature
|
no data
|
Test
DIME Test ID: 2019-04-01-31-5
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/08/2019
Date Tested: 05/01/2019
Submitted By Organization: CGI Technical Services, Incorporated
Organization Address: 1612 Insight Place,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96003
Organization Email: vkyatham@currygroup.com
Organization Phone: (530) 244-6277
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.392
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
Test
DIME Test ID: 2019-04-01-31-6
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/08/2019
Date Tested: 05/03/2019
Submitted By Organization: CGI Technical Services, Incorporated
Organization Address: 1612 Insight Place,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96003
Organization Email: vkyatham@currygroup.com
Organization Phone: (530) 244-6277
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.286
|
|
Bulk Specific Gravity 2
|
2.289
|
|
Bulk Specific Gravity 3
|
2.289
|
|
Average Bulk Specific Gravity
|
2.288
|
Test
DIME Test ID: 2019-04-01-31-7
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Submitted By Organization: CGI Technical Services, Incorporated
Organization Address: 1612 Insight Place,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96003
Organization Email: vkyatham@currygroup.com
Organization Phone: (530) 244-6277
Data has not been verified.
