DIME - Sample Record for DIME Sample ID 2019-04-01-31

DIME » All Projects » Project - DEA: 020H7604 » Sample 2019-04-01-31 » Sample Details

Sample Record

Owner Lab

CGI Technical Services, Incorporated

DIME Sample ID 2019-04-01-31

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212753 DEA: 020H7604 EFIS: 0215000086
DIST-CO-RTE-PM	02-LAS,PLU-VAR-VAR
Award Date	03/28/2019
Closeout Date	09/02/2020
Work Description	FULL DEPTH RECLAMATION AND DRAINAGE REHABILITATION
Location Description	LASSEN AND PLUMAS COUNTIES AT AND NEAR CHILCOOT FROM 0.9 MILE WEST OF SUMMIT SCHOOL DRIVE TO 0.7 MILE EAST OF ROUTE 395
QA Service Level	1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date	04/01/2019	Sample Unique Key	31
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/01/2019
Sample type	Quality Control	A brief description of the sample	HMA Lab Batch - Mix Design
The quantity of what the sample constitutes	Mix Design	From where was the sample collected	Source
First name of sampler or witnessed by	Ted	Last name of sampler or witnessed by	Kinsey
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Hat Creek - Ward Lake	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/4 inch	Lot number	Unknown
Sublot number	Unknown	HMA Mix Number	Not set

JMF Information

HMA Design ID	JMF3512-2019-98-19-1278.106	Date Created	05/08/2019
Submittal	JMF3511-227-2019-85 Submittal Authorized For Use\| JMF3513-2019-84

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments	Actions
2019-04-01-31-2	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Ted Kinsey, CGI Technical Services, Incorporated	05/01/2019	Vikram Kyatham	Yes	05/08/2019
2019-04-01-31-3	THIS TEST HAS BEEN SUPERSEDED. AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Ted Kinsey, CGI Technical Services, Incorporated	05/01/2019	Vikram Kyatham	Yes	05/08/2019	THIS TEST HAS BEEN SUPERSEDED.
2019-04-01-31-4	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Ted Kinsey, CGI Technical Services, Incorporated	05/01/2019	Vikram Kyatham	Yes	05/08/2019
2019-04-01-31-5	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Ted Kinsey, CGI Technical Services, Incorporated	05/01/2019	Vikram Kyatham	Yes	05/08/2019
2019-04-01-31-6	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Ted Kinsey, CGI Technical Services, Incorporated	05/03/2019	Vikram Kyatham	Yes	05/08/2019
2019-04-01-31-7	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Ted Kinsey, CGI Technical Services, Incorporated	05/01/2019	Vikram Kyatham	No			Info

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-04-01-31-2 AASHTO T269-14 (Verified)
DIME Test ID: 2019-04-01-31-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2019-04-01-31-4 AASHTO T308-10 (Verified)
DIME Test ID: 2019-04-01-31-5 AASHTO T209-12 (Verified)
DIME Test ID: 2019-04-01-31-6 AASHTO T275-07r12 (Verified)
DIME Test ID: 2019-04-01-31-7 AASHTO T275-07r12