Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215038 DEA: 051J7804 EFIS: 0518000052
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-101-61.88/61.88
Work Description: SAFETY IMPROVEMENTS
Location Description: WELLSONA SAFETY IMPROVEMENTS, SLO 101
Contractor Name: CALPORTLAND CONSTRUCTION
Contractor Address: 1625 East Donovan Road, Santa Maria, Ca 93456
Resident Engineer: Michael Schmidt Structure Rep.: Neil Weller
DIME Sample ID: 2025-03-03-6
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 03/03/2025
Date that the sample was received by the laboratory/organization performing the testing: 03/03/2025
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: ConFab California, LLC, Lathrop
Source Identification (SMARA, name of Pit or Job Site): Confab California Lathrop
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: VER98LV
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2025-03-03-6-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 03/05/2025
Date Tested: 03/04/2025
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
93.3 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
74.7 %
|
|
Cumulative percent passing the #4 sieve
|
49.3 %
|
|
Cumulative percent passing the #8 sieve
|
40.1 %
|
|
Cumulative percent passing the #16 sieve
|
25.8 %
|
|
Cumulative percent passing the #30 sieve
|
15.6 %
|
|
Cumulative percent passing the #50 sieve
|
7.8 %
|
|
Cumulative percent passing the #100 sieve
|
2.8 %
|
|
Cumulative percent passing the #200 sieve
|
1 %
|
DIME Test ID: 2025-03-03-6-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 03/05/2025
Date Tested: 03/03/2025
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2025-03-03-6-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 03/05/2025
Date Tested: 03/04/2025
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2": 0.24
3/8": 1.18
Sand: 1.37
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.4 %
|
DIME Test ID: 2025-03-03-6-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 03/05/2025
Date Tested: 03/03/2025
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2": 0.37%
3/8": 0.37%
Sand: 3.70%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
3.7 %
|
DIME Test ID: 2025-03-03-6-5
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 03/05/2025
Date Tested: 03/04/2025
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 1/2": 0.39%
3/8": 0.39%
Sand: 4.00%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
4 %
|
