DIME » All Projects » Project - DEA: 051J7804 » Sample 2025-03-03-6 » Sample Details

Sample Record

Owner Lab

  • Con-Fab California Corporation - Lathrop

DIME Sample ID 2025-03-03-6

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215038
DEA: 051J7804
EFIS: 0518000052
DIST-CO-RTE-PM05-SLO-101-61.88/61.88
Award Date10/22/2024
Closeout DateNot set
Work DescriptionSAFETY IMPROVEMENTS
Location DescriptionWELLSONA SAFETY IMPROVEMENTS, SLO 101
QA Service Level1 (Verified on 09/03/2020)

Sample Information

Sample Taken Date03/03/2025 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/03/2025
Sample typeQuality Control A brief description of the sample1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
The quantity of what the sample constitutes1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand From where was the sample collectedFabricator
First name of sampler or witnessed byPatrick Last name of sampler or witnessed byBaddu
Title of samplerQC Inspector Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameConFab California, LLC, Lathrop Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Confab California Lathrop
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedStockpile @ Plant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberVER98LV Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2025-03-03-6-1ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse AggregatesPatrick Baddu, Con-Fab California Corporation - Lathrop03/04/2025Patrick Baddu
Yes
03/05/2025
2025-03-03-6-2ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine AggregatePatrick Baddu, Con-Fab California Corporation - Lathrop03/03/2025Patrick Baddu
Yes
03/05/2025
2025-03-03-6-3ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingPatrick Baddu, Con-Fab California Corporation - Lathrop03/04/2025Patrick Baddu
Yes
03/05/20251/2": 0.24 3/8": 1.18 Sand: 1.37
2025-03-03-6-4ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by DryingPatrick Wright, Con-Fab California Corporation - Lathrop03/03/2025Patrick Baddu
Yes
03/05/20251/2": 0.37% 3/8": 0.37% Sand: 3.70%
2025-03-03-6-5ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by DryingPatrick Baddu, Con-Fab California Corporation - Lathrop03/04/2025Patrick Baddu
Yes
03/05/20251/2": 0.39% 3/8": 0.39% Sand: 4.00%

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-03-03-6-1 ASTM C136-19 (Verified)
DIME Test ID: 2025-03-03-6-2 ASTM D2419-14 (Verified)
DIME Test ID: 2025-03-03-6-3 ASTM C117-17 (Verified)
DIME Test ID: 2025-03-03-6-4 ASTM C566-19 (Verified)
DIME Test ID: 2025-03-03-6-5 ASTM C566-19 (Verified)