Summary for Test 2020-06-16-54-4

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 214516
DEA: 024H2404
EFIS: 0218000098
DIST-CO-RTE-PM02-TRI-3-32.0/38.0,53.7/63.8
Award Date12/23/2019
Closeout Date02/18/2021
Work DescriptionPLACE HMA (TYPE A) OVERLAY, SHOULDER BACKING, AND TRAFFIC STRIPE.
Location DescriptionTRINITY COUNTY NEAR WEAVERVILLE FROM 0.4 MILE NORTH OF BROWNS RANCH ROAD TO 0.1 MILE NORTH OF RUSH CREEK ROAD AND FROM EAST FORK STUART BRIDGE TO 2.4 MILES NORTH OF EL DORADO WAY
QA Service Level1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date06/16/2020 Sample Unique Key54
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/14/2020
Sample typeAcceptance A brief description of the sampleAsphalt Binder
The quantity of what the sample constitutes1 Can, #15 Test, No Test #16 (unknown), #17(Unknown), #18(unknown), #19(unknown) From where was the sample collectedSource
First name of sampler or witnessed byDevin Last name of sampler or witnessed byOwens
Title of samplerInspector Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameValero - Benicia, CA Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank numberNot set
Time of sampleNot set HMA SupplierNot set
Asphalt Binder SupplierNot set MultigradeNot set
Multigrade TypeNot set HMA Design ID

Test Details

DIME Sample ID: 2020-06-16-54
DIME Test ID: 2020-06-16-54-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2020-10-15

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Doug Ruff
Date of test: 10/15/2020
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.622 kPa
Phase Angle (δ) (for the 10 cycles): 57.9 degree
Complex Modulus (G*) (for the 10 measurements): 6.223 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 7.35 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standards and Specifications

Test was verified on 10/15/2020