Summary for Test 2020-06-11-54-2

Test performed: AASHTO T104-99r16

Project Information

Project IdentifiersProject ID: 213887
DEA: 024H2604
EFIS: 0218000100
DIST-CO-RTE-PM02-SIS-97-R11.5/17.1
Award Date03/15/2019
Closeout Date01/04/2021
Work DescriptionCOLD PLANE AC, REPLACE AC SURFACING, PLACE AC, RUMBLE STRIP & STRIPE.
Location DescriptionSISKIYOU COUNTY ABOUT 12 MILES NORTH OF WEED FROM YELLOW BUTTE ROAD TO 0.6 MILE NORTH OF DEER MOUNTAIN ROAD
QA Service Level1 (Verified on 04/03/2019)

Sample Information

Sample Taken Date06/11/2020 Sample Unique Key54
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/11/2020
Sample typeVerification A brief description of the sample1/2 inch Sized Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF From where was the sample collectedSource
First name of sampler or witnessed byAshton Last name of sampler or witnessed byErickson
Title of samplerRMC QC Telephone number of sampler
Laboratory sample identificationD78473A Linked DIME Sample ID
The fabricator/manufacturer/facility nameTruax Quarry Transportation Laboratory (TL) Number990768
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-47-0037
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedSized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 19-24-S3 Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-06-11-54
DIME Test ID: 2020-06-11-54-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2020-10-07

Test Results


Percentage of the total sample represented by each size

Size of aggregate being tested: Coarse Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Bang Nguyen
Date of test: 10/07/2020
Percentage of 2 ½ x 1 ½ material loss: 0 %
Percentage of 1 ½ x ¾ inch material loss: 0 %
Percentage of ¾ x ⅜ inch material loss: 0.59 %
Percentage of ⅜ inch x No. 4 material loss: 0.57 %
Coarse weighted average loss: 0.6 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/7/2020