Summary for Test 2020-09-17-21-2
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 214629 DEA: 051H9304 EFIS: 0517000017 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-46-R17.2/R17.6 |
| Award Date | 04/07/2020 |
| Closeout Date | 10/20/2022 |
| Work Description | CONSTRUCT ROUNDABOUT. |
| Location Description | SAN LUIS OBISPO COUNTY NEAR TEMPLETON FROM 0.2 MILE WEST TO 0.2 MILE EAST OF VINEYARD DRIVE |
| QA Service Level | 1 (Verified on 02/20/2020) |
Sample Information
| Sample Taken Date | 09/17/2020 | Sample Unique Key | 21 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/25/2020 |
| Sample type | Verification | A brief description of the sample | Boxes of HMA-A |
| The quantity of what the sample constitutes | One JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Larry | Last name of sampler or witnessed by | Scott |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CalPortland Paso Robles | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-09-17-21
DIME Test ID: 2020-09-17-21-2
Testing Lab: CT D05 - San Luis Obispo District Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2020-10-01
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: E. Atkins
Date of test: 09/30/2020
Mass of the dry specimen in air: 4554.7 g
Mass of the dry specimen plus paraffin coating in air: 4627 g
Mass of the dry specimen plus paraffin coating in water: 2569.8 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4551 g
Mass 2 of the dry specimen plus paraffin coating in air: 4618.8 g
Mass 2 of the dry specimen plus paraffin coating in water: 2576.7 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4570.2 g
Mass 3 of the dry specimen plus paraffin coating in air: 4636.5 g
Mass 3 of the dry specimen plus paraffin coating in water: 2583.4 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.304
Bulk Specific Gravity 2: 2.314
Bulk Specific Gravity 3: 2.309
Average Bulk Specific Gravity: 2.309
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/1/2020 ✔