Summary for Test 2020-08-10-29-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 212630 DEA: 022H6304 EFIS: 0216000156 |
---|---|
DIST-CO-RTE-PM | 02-TEH-36-26.6/27.6 |
Award Date | 06/19/2020 |
Closeout Date | 01/05/2021 |
Work Description | DIAMOND STAR CURVE |
Location Description | TEHAMA COUNTY ABOUT 14 MILES WEST OF RED BLUFF FROM 0.3 MILE WEST OF BASLER ROAD TO 0.1 MILE EAST OF DIAMOND STAR ROAD |
QA Service Level | 1 (Verified on 08/10/2017) |
Sample Information
Sample Taken Date | 08/10/2020 | Sample Unique Key | 29 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/10/2020 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" Class II AB |
The quantity of what the sample constitutes | not provided | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Dave | Last name of sampler or witnessed by | Lockett |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78563 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Northstate Asphalt | Transportation Laboratory (TL) Number | 002343 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Tullis - Northstate Asphalt |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Windrow | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-08-10-29
DIME Test ID: 2020-08-10-29-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-08-19
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Arthur Mills
Date of test: 08/12/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
68 grams | 99 % | |||||
1318 grams | 89 % | |||||
2749 grams | 78 % | |||||
5955 grams | 52 % | |||||
186.4 grams | 32 % | |||||
314.7 grams | 19 % | |||||
395.8 grams | 10 % | |||||
442.1 grams | 5 % | |||||
464 grams | 3 % | |||||
472.2 grams | 2 % | |||||
489.8 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/19/2020 ✔