Summary for Test 2020-07-30-20-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214859 DEA: 120R8804 EFIS: 1219000050 |
---|---|
DIST-CO-RTE-PM | 12-ORA-39-19.0/22.6 |
Award Date | 05/15/2020 |
Closeout Date | 01/15/2021 |
Work Description | COLD PLANE AC PAVEMENT, PLACE RHMA AND INDUCTIVE LOOP DETECTOR. |
Location Description | IN ORANGE COUNTY IN LA HABRA FROM WESTRIDGE PLAZA NORTH TO HARBOR BOULEVARD |
QA Service Level | 1 (Verified on 08/13/2020) |
Sample Information
Sample Taken Date | 07/30/2020 | Sample Unique Key | 20 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/31/2020 |
Sample type | Verification | A brief description of the sample | JMF 1/2" RHMA-G-WMA 0.6% Evotherm |
The quantity of what the sample constitutes | 4 Bags Combined Agg., | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Loi | Last name of sampler or witnessed by | Nguyen |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0472G-20 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Blue Diamond Material-Irwindale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0052 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | 300191 WMA | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Irwindale Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-07-30-20
DIME Test ID: 2020-07-30-20-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-08-10
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Satish Jain/Larry Diaz
Date of test: 08/04/2020
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 96 %
Cumulative percent passing the 3/8 in. sieve: 83 %
Cumulative percent passing the #4 sieve: 39 %
Cumulative percent passing the #8 sieve: 15 %
Cumulative percent passing the #16 sieve: 10 %
Cumulative percent passing the #30 sieve: 7 %
Cumulative percent passing the #50 sieve: 5 %
Cumulative percent passing the #100 sieve: 3 %
Cumulative percent passing the #200 sieve: 2.2 %
General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation
Test was verified on 8/10/2020 ✔