Summary for Test 2020-07-02-14-9

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 214849
DEA: 081J9404
EFIS: 0818000139
DIST-CO-RTE-PM08-SBD-18,247-68.5/87.9,46.0/49.0
Award Date05/21/2020
Closeout Date11/09/2021
Work DescriptionREPLACE ASPHALT CONCRETE SURFACING AND STRIPING.
Location DescriptionSAN BERNARDINO COUNTY ON ROUTE 18 FROM 1.4 MILES NORTH OF CAMP ROCK ROAD TO CENTRAL ROAD AND ON ROUTE 247 FROM 0.1 MILE SOUTH OF RABBIT SPRINGS ROAD TO 2.1 MILES SOUTH OF NORTHSIDE ROAD
QA Service Level1 (Verified on 10/21/2020)

Sample Information

Sample Taken Date07/02/2020 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/09/2020
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15 0.75%LAS
The quantity of what the sample constitutes8 Bags Agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Oro Grande Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0413A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan- Oro Grande Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-36-0022
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sampleUnknown
The plant number220991 ORO SJR A detailed description of where the material sample was collectedBelt Cut at Vulcan Oro Grande Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown JMF Verification ID

Test Details

DIME Sample ID: 2020-07-02-14
DIME Test ID: 2020-07-02-14-9
Testing Lab: CT - Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-07-22

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Input Type: Calculated
Tester's full name: Satish Jain
Date of test: 07/17/2020
Cumulative percent passing the 3 in. sieve:100 %
Cumulative percent passing the 2 1/2 in. sieve:100 %
Cumulative percent passing the 2 in. sieve:100 %
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:100 %
Cumulative percent passing the 3/4 in. sieve:100 %
Cumulative percent passing the 1/2 in. sieve:100 %
Cumulative percent passing the 3/8 in. sieve:98 %
Cumulative percent passing the #4 sieve:69 %
Cumulative percent passing the #8 sieve:52 %
Cumulative percent passing the #16 sieve:39 %
Cumulative percent passing the #30 sieve:29 %
Cumulative percent passing the #50 sieve:20 %
Cumulative percent passing the #100 sieve:13 %
Cumulative percent passing the #200 sieve:8.1 %
General comments (publicly viewable) (Max 1000 characters): Rap Gradation After Ignition Oven

Test was verified on 7/22/2020