Summary for Test 2020-07-02-14-4

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 214849
DEA: 081J9404
EFIS: 0818000139
DIST-CO-RTE-PM08-SBD-18,247-68.5/87.9,46.0/49.0
Award Date05/21/2020
Closeout Date11/09/2021
Work DescriptionREPLACE ASPHALT CONCRETE SURFACING AND STRIPING.
Location DescriptionSAN BERNARDINO COUNTY ON ROUTE 18 FROM 1.4 MILES NORTH OF CAMP ROCK ROAD TO CENTRAL ROAD AND ON ROUTE 247 FROM 0.1 MILE SOUTH OF RABBIT SPRINGS ROAD TO 2.1 MILES SOUTH OF NORTHSIDE ROAD
QA Service Level1 (Verified on 10/21/2020)

Sample Information

Sample Taken Date07/02/2020 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/09/2020
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15 0.75%LAS
The quantity of what the sample constitutes8 Bags Agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Oro Grande Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0413A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan- Oro Grande Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0022
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sampleUnknown
The plant number220991 ORO SJR A detailed description of where the material sample was collectedBelt Cut at Vulcan Oro Grande Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-07-02-14
DIME Test ID: 2020-07-02-14-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-07-22

Test Results


Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 07/16/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 966.9 grams
Mass of the pycnometer with water (B): 655.1 grams
Mass of the oven dried sample (before pycnometer) (A): 493.7 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 493.7 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.623
Bulk specific gravity (SSD Basis): 2.657
Apparent specific gravity: 2.714
Absorption: 1.3 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/22/2020