Summary for Test 2020-05-21-35-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 214725
DEA: 020J1304
EFIS: 0219000064
DIST-CO-RTE-PM02-LAS-139-43.0/53.0
Award Date04/10/2020
Closeout Date10/06/2020
Work DescriptionCOLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A).
Location DescriptionLASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD
QA Service Level1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date05/21/2020 Sample Unique Key35
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/22/2020
Sample typeVerification A brief description of the sampleCombined 1/2-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF Verification Renewal From where was the sample collectedSource
First name of sampler or witnessed byJimmy Last name of sampler or witnessed byMontana
Title of sampler Telephone number of sampler
Laboratory sample identificationD78440F Linked DIME Sample ID
The fabricator/manufacturer/facility nameShaw Pit Transportation Laboratory (TL) Number733194
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-25-0008
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberJMF 19-05-R1 Lot numberUnknown
Sublot numberUnknown JMF Verification ID JMF3513-2020-158

Test Details

DIME Sample ID: 2020-05-21-35
DIME Test ID: 2020-05-21-35-1
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-07-17

Test Results


What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Input Type: Calculated
Tester's full name: Ward Jenkins
Date of test: 07/13/2020
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:100 %
Cumulative percent passing the 3/4 in. sieve:100 %
Cumulative percent passing the 1/2 in. sieve:97 %
Cumulative percent passing the 3/8 in. sieve:82.6 %
Cumulative percent passing the 1/4 in. sieve:66.4 %
Cumulative percent passing the #4 sieve:56.9 %
Cumulative percent passing the #8 sieve:33.3 %
Cumulative percent passing the #16 sieve:19.8 %
Cumulative percent passing the #30 sieve:12 %
Cumulative percent passing the #50 sieve:7.6 %
Cumulative percent passing the #100 sieve:5.2 %
Cumulative percent passing the #200 sieve:4.19 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/17/2020