Summary for Test 2020-05-21-34-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214725 DEA: 020J1304 EFIS: 0219000064 |
---|---|
DIST-CO-RTE-PM | 02-LAS-139-43.0/53.0 |
Award Date | 04/10/2020 |
Closeout Date | 10/06/2020 |
Work Description | COLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A). |
Location Description | LASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD |
QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
Sample Taken Date | 05/21/2020 | Sample Unique Key | 34 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/22/2020 |
Sample type | Verification | A brief description of the sample | Washed Dust Untreated Sized Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification Renewal | From where was the sample collected | Source |
First name of sampler or witnessed by | Jimmy | Last name of sampler or witnessed by | Montana |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78440C | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Shaw Pit | Transportation Laboratory (TL) Number | 733194 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0008 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Untreated Sized Aggregate Stockpile |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | fine |
The concrete mix design number | JMF 19-05-R1 | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-05-21-34
DIME Test ID: 2020-05-21-34-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-07-13
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: K. Spliethof and McCormick
Date of test: 05/23/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
510.4 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0 grams | 100 % | |||||
56.5 grams | 88.9 % | |||||
202.6 grams | 49.2 % | |||||
318.0 grams | 26.6 % | |||||
386.7 grams | 13.2 % | |||||
426.1 grams | 5.4 % | |||||
442.7 grams | 2.2 % | |||||
446.3 grams | 1.49 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/13/2020 ✔