Summary for Test 2020-05-15-26-3
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 214250 DEA: 021H3204 EFIS: 0215000126 |
---|---|
DIST-CO-RTE-PM | 02-TEH-99-12.0/12.6 |
Award Date | 10/09/2019 |
Closeout Date | 11/01/2021 |
Work Description | CONSTRUCT CURB RAMPS AND SIDEWALKS. |
Location Description | TEHAMA COUNTY AT LOS MOLINOS FROM JOSEPHINE STREET TO LOS MOLINOS CREEK BRIDGE |
QA Service Level | 1 (Verified on 07/22/2019) |
Sample Information
Sample Taken Date | 05/15/2020 | Sample Unique Key | 26 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/15/2020 |
Sample type | Acceptance | A brief description of the sample | 3/4 inch Maximum Class 2 Aggregate Base with RAP |
The quantity of what the sample constitutes | Blank | From where was the sample collected | Source |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | Telephone number of sampler | 530-604-5116 | |
Laboratory sample identification | D78432 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Thomas Creek Rock | Transportation Laboratory (TL) Number | C853457 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Latona Pit, Thomas Creek Rock |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile @ Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-05-15-26
DIME Test ID: 2020-05-15-26-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-07-06
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 05/18/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
195 grams | 99 % | |||||
2119 grams | 85 % | |||||
3563 grams | 74 % | |||||
6723 grams | 51 % | |||||
147.3 grams | 36 % | |||||
264.3 grams | 24 % | |||||
347.2 grams | 16 % | |||||
411.6 grams | 9 % | |||||
444.4 grams | 6 % | |||||
458 grams | 5 % | |||||
505 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/6/2020 ✔