Summary for Test 2020-06-07-1-3
Test performed: ASTM A615-15Project Information
| Project Identifiers | Project ID: 208973 DEA: 120H1004 EFIS: 1200000180 COOP: 120670 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-405,73,405,605-9.3/24.3 |
| Award Date | 11/07/2016 |
| Closeout Date | Not set |
| Work Description | (Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP. |
| Location Description | Orange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2 |
| QA Service Level | 1 (Verified on 09/10/2015) |
Sample Information
| Sample Taken Date | 06/07/2020 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/10/2020 |
| Sample type | Department Acceptance | A brief description of the sample | #8 epoxy coated grade 75 rebar |
| The quantity of what the sample constitutes | 25 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Kenneth | Last name of sampler or witnessed by | Varela |
| Title of sampler | Associate Steel Inspector | Telephone number of sampler | (562) 440-7716 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Williams Form Eng | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L08-055-20 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM5 - Threaded Bar | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Threaded Bar Specification | ASTM A615 | Threaded Bar Grade | 75 |
| Threaded Bar Type | Deformed | Rebar Size | #8 |
| Nut Specification for Threaded Bar | ASTM A108 | System Manufacturer | Williams Form Eng |
| Epoxy Coating Color | Purple | Threaded Bar Application | Soil Nail |
| Coating Standards | ASTM A934 epoxy | Bar Heat Number(s) | D19104229 |
| Nut Heat Number(s) | 8296508 | Bar Lot Number | DL1910422903 |
| Nut Lot Number | 8S5D | Coupler Heat Number(s) | |
| Coupler Grade |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-06-07-1
DIME Test ID: 2020-06-07-1-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A615-15: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement (Tensile)
Test Release Date: 2020-06-10
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: bewing
Date of test: 06/10/2020
UTM: 400kip
Temperature: 72 f
| Num | Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | No.8/25mm | 0.79 | 127939 | 104539 | 5.82 | A615 Threaded Bar and Nut | bewing |
General comments (publicly viewable) (Max 1000 characters): A615 Threaded Bar and Nut
Test Graph
Source: Bluehill Data Point File
WARNING: strain or stress not found in data points imported from Instron machine.
Test was verified on 6/10/2020 ✔