Summary for Test 2014-11-18-1-3
Test performed: ASTM C39-10Project Information
| Project Identifiers | Project ID: 209059 DEA: 033E1004 EFIS: 0300000473 |
|---|---|
| DIST-CO-RTE-PM | 03-PLA-80-8.1/37.8 |
| Award Date | 01/28/2014 |
| Closeout Date | 01/23/2017 |
| Work Description | IMPROVING VERTICAL CLEARANCE |
| Location Description | PLACER COUNTY IN AND NEAR LOOMIS, PENRYN, NEWCASTLE, WEIMAR, AND MAGRA FROM 0.1 MILE WEST OF BRACE ROAD OVERCROSSING TO 0.1 MILE EAST OF MAGRA OVERCROSSING |
| QA Service Level | 1 (Verified on 01/15/2014) |
Sample Information
| Sample Taken Date | 11/18/2014 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 11/18/2014 |
| Sample type | Verification | A brief description of the sample | Class I Concrete |
| The quantity of what the sample constitutes | 8 Cylinders | From where was the sample collected | Source |
| First name of sampler or witnessed by | Joe | Last name of sampler or witnessed by | Harline |
| Title of sampler | ASR | Telephone number of sampler | 530-701-2929 |
| Laboratory sample identification | Linked DIME Sample ID | Not set | |
| The fabricator/manufacturer/facility name | Jobsite | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | J7A8543CC NE |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | unknown | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | MIX TRUCK | Where the material sample would have been placed if not sampled | Not set |
| From Lot No. | Not set | Bag Lot No. | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2014-11-18-1
DIME Test ID: 2014-11-18-1-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2014-11-21
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: BN
Date of test: 11/21/2014
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.01 in
Maximum load on cylinder 1: 73347 lb
Maximum load on cylinder 2: 72192 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: no data
Age of specimen: 3 days
Cross sectional area of cylinder 1: 28.27 in^2
Cross sectional area of cylinder 2: 28.37 in^2
Compressive strength of cylinder 1: 2594.5 psi
Compressive strength of cylinder 2: 2544.7 psi
Compressive strength (to nearest 10 psi): 2570 psi
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Cylinder Code 1 of 2
Source: Partner Data Point File
Test graph for Cylinder Code 2 of 2
Test was verified on 11/21/2014 ✔