Summary for Test 2020-05-04-18-6
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 213884 DEA: 051F1004 EFIS: 0513000057 Permit Numbers: 0519NOP0704 0520NDP0091 |
|---|---|
| DIST-CO-RTE-PM | 05---82.18/-1 |
| Award Date | 01/07/2020 |
| Closeout Date | 08/17/2022 |
| Work Description | Re-align on and off-ramps at NB interchange. Signalize the intersection, revise pavement delineation and markings on Clark Avenue, minor pavement rehabilitation, guardrail replacement and widening at southbound off-ramp.Construct interchange improvements at US Highway 101 and Clark Avenue accordin |
| Location Description | US Highway 101, Orcutt unincorporated |
| QA Service Level | 1 (Verified on 02/18/2020) |
Sample Information
| Sample Taken Date | 05/04/2020 | Sample Unique Key | 18 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/07/2020 |
| Sample type | Verification | A brief description of the sample | Bags of Virgin stockpiles |
| The quantity of what the sample constitutes | JMF Virgin Agg | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Sal | Last name of sampler or witnessed by | Lopez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Bee Rock and CPC | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-42-0014 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | At the Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-05-04-18
DIME Test ID: 2020-05-04-18-6
Testing Lab: CT D05 - San Luis Obispo District Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-05-13
Test Results
Input Type: Measured
Tester's full name: Daniel Gingras
Date of test: 05/12/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 954.4 grams
Mass of the pycnometer with water (B): 649.3 grams
Mass of the oven dried sample (before pycnometer) (A): 487.8 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 487.8 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.503
Bulk specific gravity (SSD Basis): 2.565
Apparent specific gravity: 2.670
Absorption: 2.5 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/13/2020 ✔